Dunavox DX-28.65C [8/11] Warning

INSTRUCTION MANUAL

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR REFRIGERATOR

 Remove the exterior and interior packing

 Check to be sure the following parts are included:

o slide out shelves (DAT-6.16C 2pcs, DAT-12.33DC 4 pcs, DAT-12.33C

&DAT-24.68DC 5 pcs, DX-28.65C 6 pcs)

o instruction manual

 Before connecting the appliance to the power source, let it stand upright for

approximately 2 hours. This will reduce the possibility of a malfunction in the

cooling system from handling during transportation.

 Clean the interior surface with lukewarm water using a soft cloth.

 Place your appliance on a floor that is strong enough to support the appliance

when it is fully loaded. To level your appliance, adjust the front legs at the bottom

of the appliance.

 Do not place the unit to direct sunlight and sources of heat (stove, heater,

radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources

may increase electrical consumption. Extreme cold or hot ambient temperatures

may also cause the appliances not to perform properly. Never place the cooler

on the top of refrigerator!. Never build or recess the cooler into the

furniture. For such installation choose our built-in or under counter

models!

ELECTRICAL CONNECTION

Warning!

IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK.

IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED PRODUCTS

SERVICE CENTER.

 This unit should be properly grounded for your safety. The power cord of this unit

is equipped with a 2-pin plug which mates with 2-pin wall outlets to minimize the

possibility of electrical shock. Do not under any circumstances cut or remove the

ground from the power cord supplied.

 Use of extension cords is not recommended.

 This unit requires a standard 220V-50HZ electrical outlet with 2-pin plug.

 The cord should be secured behind the refrigerator and not let exposed or

dangling to prevent accidental injury.