Hyundai H-AR6-07 H [10/40] Maintenance

Electric air conditioner (split system)

Drying operation mode

1. Press the «MODE» button, select the drying operation mode.

2. Press the «ON/OFF» button, the air-conditioner starts to operate.

3. Press the «ON/OFF» button again, the air-conditioner stops.

Backlight function (for remote controllers with such function only)

The remote controller has a backlight which can be turned on by pressing

any button for the convenience of operation in darkness. The backlight will be

automatically turned oﬀ if there is no operation within 10 seconds.

8. MAINTENANCE

Before cleaning unplug the conditioner.

Cleaning of the indoor unit and remote control board:

• Indoor unit and remote control board should be cleaned with a dry soﬅ cloth.

• If the indoor unit is too unclean, moisten the cloth with cold water.

• In order to avoid the damage of paint or details of the conditioner, do not

clean it with brushes and do not leave them on the surface of indoor unit.

• In order to avoid the damage of surface or deformation of the conditioner

details, do not clean it with petrol, solvents, cleaning powders or other

chemically active substances.

Before a sustained interruption in the conditioner work:

• Turn the conditioner on for several hours in the FAN mode. It will allow you

to dry its inner cavities.

• Unplug the conditioner.

• Remove the batteries from the remote control board.

Cheks before starting:

• Make sure that an air ﬁ lter is installed.

• Make sure that air inlet and outlet grilles of the outdoor unit are not

blocked by foreign objects.

Cleaning of air ﬁ lter.

• Air ﬁ lter cleans the air entering the conditioner from dust and foreign particles.

If the ﬁ lter is contaminated, the conditioner capacity decreases sharply.

• If the conditioner is operated permanently, the ﬁ lter should be cleaned

once per two weeks.

• If the conditioner is installed in a room with dusty atmosphere, then the air

ﬁ lter should be cleaned more oﬅ en.

• To remove the ﬁ lter, open the indoor unit panel.

• Remove air ﬁ lters. Clean the ﬁ lter with a vacuum cleaner or rinse it in clean

water. If the ﬁ lter is contaminated heavily, clean it with a soﬅ brush and

wash in diluted washing solution, then dry it in a cool place.