BEST KB 700 900 XS [11/40] Maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

BEST KB 700 900 XS [11/40] Maintenance

BEST Modular [11/40] Maintenance
Components not provided with the product
- 5’ timer function:
Pressing PU2, PU3 or PU4 for two seconds when the motor
is set to the corresponding speed, the 5’ timer function is
activated. The corresponding LED starts blinking to display
this function. After five minutes of operation the motor is
turned off. If you change the speed while the timer is
running, the function is NOT deactivated. To deactivate the
function, press the blinking key for two seconds.
NOTE – the 5’ timer function can be activated for the
normal speeds only (1st, 2nd, 3rd)
- Buzzer:
Each time the key is pressed, a beep is sounded.
- Filter alarm:
After 30 hours of motor operation, the grease filter alarm is
activated (all the LEDs come on).
The alarm is activated when the motor is off and remains
displayed for 30". To deactivate the alarm, press one of the
keys for 2" during alarm display. After 120 hours of motor
operation, the charcoal filter alarm is activated (all the LEDs
blink).
The alarm is activated when the motor is off and remains
displayed for 30". To deactivate the alarm, press one of the
keys for 2" during alarm display.
MAINTENANCE
! Before cleaning or maintenance cut the power.
Cleaning the hood
WHEN TO CLEAN IT: clean it at least every 2 months to prevent
the risk of fire.
EXTERNAL CLEANING: use a cloth moistened in lukewarm
water and neutral detergent (for painted hoods); use specific
products for steel, copper or brass hoods.
INTERNAL CLEANING: use a cloth (or brush) soaked in
denatured ethyl alcohol.
WHAT NOT TO DO: do not use abrasive or corrosive products
(e.g. metal sponges, brushes, too hard brushes, very aggres-
sive detergents, etc.)
Cleaning the grease filters
WHEN TO CLEAN IT: clean it at least every 2 months to prevent
the risk of fire.
HOW TO REMOVE THE FILTERS: push the catch near the
handle towards the rear of the hood and pull the filter downwards
HOW TO CLEAN THE FILTERS: hand wash or in the
dishwasher using a neutral detergent. If washing in the
dishwasher, possible discoloration of the filters does not in
any way compromise their functioning.
Replacing the charcoal filter (P)
(for filtering version only)
WHEN TO REPLACE IT:
replace it at least every 6 months.
HOW TO REMOVE IT:
f using the hood in the filtering version, the
charcoal filter will have to be replaced. Remove the charcoal
filter by turning it clockwise.
Replacing the lamps
- open the halogen lamp door by pressing on one side (where
it says PUSH) and release. Replace with lamps of the same
type. WARNING: Do not touch the new lamp with bare
hands.
- If the light spot is damaged, it must be replaced only by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
MALFUNCTIONS
If something appears not to be working properly, do the
following simple checks before calling Technical
Service:
• If the hood is not working:
Check that:
- The power has not been disconnected.
- A speed has been selected.
• If the hood performs inefficiently:
Check that:
- The motor speed selected is sufficient for the amount
of smoke and vapours released.
- The kitchen is sufficiently ventilated to allow air intake.
- The charcoal filter is not worn (hood in filtering
version).
• If the hood has turned off during normal functioning:
Check that:
- The power has not been disconnected.
- the omnipolar disconnection device has not tripped.

Содержание

Похожие устройства

5 timer function Pressing PU2 PU3 or PU4 for two seconds when the motor is set to the corresponding speed the 5 timer function is activated The corresponding LED starts blinking to display this function After five minutes of operation the motor is turned off If you change the speed while the timer is running the function is NOT deactivated To deactivate the function press the blinking key for two seconds NOTE the 5 timer function can be activated for the normal speeds only 1st 2nd 3rd Buzzer Each time the key is pressed a beep is sounded Filter alarm After 30 hours of motor operation the grease filter alarm is activated all the LEDs come on The alarm is activated when the motor is off and remains displayed for 30 To deactivate the alarm press one of the keys for 2 during alarm display After 120 hours of motor operation the charcoal filter alarm is activated all the LEDs blink The alarm is activated when the motor is off and remains displayed for 30 To deactivate the alarm press one of the keys for 2 during alarm display Replacing the lamps open the halogen lamp door by pressing on one side where it says PUSH and release Replace with lamps of the same type WARNING Do not touch the new lamp with bare hands MAINTENANCE Before cleaning or maintenance cut the power Cleaning the hood WHENTOCLEAN IT clean it at least every 2 months toprevent the risk of fire EXTERNAL CLEANING use a cloth moistened in lukewarm water and neutral detergent for painted hoods use specific products for steel copper or brass hoods INTERNAL CLEANING use a cloth or brush soaked in denatured ethyl alcohol WHATNOTTODO do not use abrasive or corrosive products e g metal sponges brushes too hard brushes very aggres sive detergents etc Cleaning the grease filters WHENTOCLEAN IT clean it at least every 2 months toprevent the risk of fire HOW TO REMOVE THE FILTERS push the catch near the handletowards the rear of the hood and pull thefilterdownwards HOW TO CLEAN THE FILTERS hand wash or in the dishwasher using a neutral detergent If washing in the dishwasher possible discoloration of the filters does not in any way compromise their functioning Replacing the charcoal filter P for filtering version only WHENTOREPLACE IT replace it at least every 6 months HOWTOREMOVE IT f using the hood in the filtering version the charcoal filter will haveto be replaced Remove the charcoal filter by turning it clockwise If the light spot is damaged it must be replaced only by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard MALFUNCTIONS If something appears not to be working properly do the following simple checks before calling Technical Service If the hood is not working Check that The power has not been disconnected A speed has been selected If the hood performs inefficiently Check that The motor speed selected is sufficient for the amount of smoke and vapours released The kitchen is sufficiently ventilated to allow air intake The charcoal filter is not worn hood in filtering version If the hood has turned off during normal functioning Check that The power has not been disconnected the omnipolar disconnection device has not tripped Components not provided with the product

Скачать