Sven Stream Light Cherry [10/12] The system connection instruction

USER’S MANUAL

5. THE SYSTEM CONNECTION INSTRUCTION

WARNING! All components should be switched off before connection.

5.1. Connection to the sound source

While connecting to the sound source, use the RCA pin type connecting line.

Please connect correctly the marked «left» jack to other marked «left» plug of other components.

5.2. Loudspeakers connection

Connect speakers to each other with special 4 - wire cable.

6. SYSTEM INSTALLATION AND OPERATION

First make sure that all connections are correct and then switch on the speaker system.

• Plug the connector for power.

• Revolve regulator knobs to the minimum; press the power button on the backside of the active loudspeaker.

• Adjust the BASS knob to set bass effect.

• Adjust the TREBLE knob to set high-frequency level.

• Adjust the VOLUME knob to set general system volume level.

• Use the soundcard Line-Out port to improve sound quality.

7. TROUBLE CHECKING AND SHOOTING

Problem Cause Solution

No power The power plug is connected improperly Reconnect properly

The power switch is not turned on Turn on the power switch

No sound The volume regulator is at minimum position Turn the volume regulator properly

The signal source is connected improperly Connect properly

No woofer sound

or volume low

The signal source improper connection Connect the signal source properly

The woofer volume regulator is at minimum position Adjust the woofer regulator properly

Distortion Volume is too loud Adjust the volume regulator properly