Deaf Bonce Apocalypse AP-P128NEO [3/12] Ohm 16 ohm

1. INTRODUCTION

Thank you for purchasing this ALPHARD product! Alphard Sound Technology is committed to the creation of extremely high-profile systems with no loss

of quality.

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe CAUTION’s in this

manual. Please keep the manual in a safe and accessible place for future reference.

1. Fasten the audio system properly when installing it in the vehicle. If the component is disconnected during driving, it may cause serious damage to the

passengers of the car or another vehicle.

2. Before installing the components, if possible store the product in the package passengers of the car to avoid accidental damage.

3. Be careful when installing and dismantling the acoustic systems! Do not let the speaker drop to avoid damage of its moving parts.

selected area or inside it.

9. When stretching the speaker cables make sure that they are not in contact with sharp edges or moving mechanical devices. Make sure that they are

firmly fixed and protected over the entire length.

10. The diameter of the speaker cables must be selected in accordance with the length and applied power.

11. Never stretch the cables outside the car and near the moving parts of the car. This can lead to destruction of the insulating layer, short circuit and fire.

12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies close to the parts exposed to

heat.

13. Possible commutation versions are presented on the following pages. Using the data from the table below, check the minimum resistance of your

amplifier specified by the manufacturer.

CAUTION!!! High sound pressure can damage your health! Please use the common sense when controlling volume!

SERIAL CONNECTION OF THE SPEAKERS

8 Ohm

16 Ohm

3

EN

Voice coil

Total impedance

Voice coil

Total impedance

8 Ohm