D-Link DCS-4602EV [12/92] Using the dcs 37 1 mount optional

12D-Link DCS-4602EV User Manual

Section 2: Installation

Using the DCS-37-1 Mount (optional)

To mount the camera with the DCS-37-1 mount, follow the instructions below.

Step 2

Use the provided screws to mount the DCS-37-1 to the wall.

Step 1

Place the DCS-37-1 mounting sticker in the desired location, then use a 6 mm drill bit to drill

the required holes 25 mm deep and insert the wall anchors into the holes. If you plan to pass

cables through the wall, you will also need to drill a hole for the cable channel.

Note: The camera in the corresponding graphics may be dierent from your product, but the

basic process is the same.

Step 3

Guide the camera connectors through the back or bottom cable channel on the DCS-37-1.

Then screw the mounting plate to the bracket using the set of mounting holes marked B.