D-Link DMC-700SC [4/12] Hassis

Switch 1: Fiber mode switch

When the switch was turned to “On”, it means that the fiber was

turned to forced mode, and “Off” for auto-negotiation mode.

Note: be sure the opposite end is using the same setting (Forced or

Auto-negotiation). And when using two converters at the same time,

the two converters MUST set to forced mode.

Switch 2: LLR

When the switch was turned to “On”, it means that the LLR was

enabled and “Off” for disabled.

Note: When using two converters, don’t enable the both devices’ LLR

function at the same time.

INSTALLING IN A CHASSIS

The Converter can be fit into any of the expansion slots on DMC-1000

chassis.

First, install the converter onto a carrier supplied with the chassis:

Step 1. Unscrew and pull out the media converter board.

Step 2. Plug in the media board to any of the vacant slots.

Step 3. Fit the converter onto the carrier and use the screw to secure

it.

Unscrew and pull out the media

converter board