D-Link DHP-W310AV rev.C1 [10/61] Room a room b room c

10D-Link DHP-W310AV User Manual

Section 2 - Installation

Hardware Installation

Power

Plug the DHP-W310AV into an AC wall outlet where you want to extend your network. The Power LED on the DHP-W310AV will turn on to indicate

it is receiving power. This may take up to 60 seconds.

Plug in the Ethernet Cable

Connect one end of the supplied CAT5 Ethernet cable to the Ethernet port on the DHP-W310AV and the other end of the cable to the device’s

Ethernet interface.

Connect to Existing Network

Press the Common Connect Button on the existing PowerLine AV device for 3 seconds. Then, press the Common Connect Button on the DHP-

W310AV PowerLine AV 500 Wireless N Mini Extender for 3 seconds. This must be done within two minutes after pressing the Common Connect

Button on the rst device. The PowerLine devices will reboot. Read the Wi-Fi advice on the next page, and continue to Conguration.

Note: Network connectivity is conrmed when the PowerLine LEDs indicators on both PowerLine devices are steadily lit. This will indicate that your

network is now secure.

Note: A minimum of two PowerLine devices (your DHP-W310AV and another pre-existing device) are required to create a PowerLine network.

ROOM A ROOM B ROOM C

DHP-W310AV

DHP-308AV

RouterInternet

Notebook Notebook

iPad iPad