Bork IR NWV 3218 ** [27/32] Advice for good ironing

Instruction manual

 After you have used all the water in the tank, you can pull the

steam control button further upwards to remove the steam control

needle. It is then possible to remove any scale from the needle.

For this purpose you may use vinegar.

void bending or damagingvoid bending or damaging

void bending or damaging

the steam contrthe steam contr

the steam contr

ol needle!ol needle!

ol needle!

 Replace the steam control needle. Insert the point of the needle

exactly in the center of the aperture and fit the small notch at the

side into the spacing.

 Press the steam control button to check if it is exactly in place.

 Set the steam control button to position “(no steam)”.

WARNING: DO NOT PUT VINEGAR, STARCH, CHEMICALLY DESCALED

WATER OR DESCALING AGENTS IN THE WATER TANK!

AfAf

ter self cleaningter self cleaning

ter self cleaning

 Move the iron gently over a piece of cloth to remove water stain.

 Cool down the iron for storage.

We recommend using the lowest temperatures with fabrics that have

unusual finishes (sequins, embroidery, flush, etc.).

If the fabric is mixed (e.g. 40% cotton 60% synthetics), set the

thermostat to the temperature of the fibre requiring the lower

temperature.

If you don’t know the composition of the fabric, determine the suitable

temperature by testing on a hidden corner of the garment. Start with

ADVICE FOR

GOOD IRONING