Dahua DHI-ARD1611-W [11/12] Use of product

7. Use of Product

LED Setup

You can set LED jumper stitch to control LED indicator. Indicator have two mode: ON and

OFF.

You can set two shifts at position of jumper stitch: 1&2(P1) and 2&3(P2), select P1 as

LED-OFF and P2 as LED-ON. Default mode is LED-ON.

Note:

Operation of detector will not be affected.

Pulse Count

You may set P.COUNT (pulse count) pulse according to product usage environment and

detection distance.

You can set two shifts at position of jumper stitch: 1&2(P1) and 2&3(P2), select P1 to be

first level pulse, and P2 to be second level pulse. P2 is selected by default. Please note

that P2 detectuon has higher sensitivity than P1 detection.

Installation Test

You can test the working status of detector, see:

Within the detectable area of detector, test by normal walk speed of 1m/s, and the red

indicator keeps ON for 2 seconds. This represents that IR has been triggered, detector is

in alarm status now and outputs alarm signal, so red indicator turns ON.