Tp-Link NC450 V2 Руководство пользователя онлайн [7/52] 392902

NC450

• Used as the WPS button:

If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect the

camera to your Wi-Fi network using WPS. Press the WPS or QSS button on your

router. Within 2 minutes, press the WPS/Reset button on the camera for about 2

seconds, then the LED above this button will start flashing quickly. When this LED

becomes solid on, the WPS is successful.

• Used as the Reset button:

With the camera powered on, press and hold the WPS/Reset button (for more than 5

seconds) until the System LED turns off. Then release the button and wait the camera

to reset to its factory default settings.

 WPS LED:

Status

Indication

Flashing Green

The camera starts booting up.

The camera is connecting to a network by WPS function.

Off

The camera has boot up.

The camera failed to be added to a network by WPS function.

Solid Green

The camera

has been successfully added to a network by WPS

function. This process will last in the first two minutes.