Tp-Link NC250 V1 Руководство пользователя онлайн [13/47] 392904

NC220

NC230

NC250

Day/Night Cloud Camera, 300Mbps Wi-Fi

HD Day/Night Wi-Fi Cloud Camera

HD Day/Night Cloud Camera, 300Mbps Wi-Fi

Solid Green

The camera has been successfully added to a network by WPS

function. This process will last in the first 2 minutes.

 Ethernet Port: The ethernet port is used to connect the camera to a network via RJ45 cable.

 Power Jack: The power jack is where you connect the power adapter to the camera.

 WPS/RESET Button: This button is used for both WPS and RESET function. To use the WPS

function, press it for 1 second. To use the RESET function, press and hold for more than 5

seconds.

 Used as the WPS button:

If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect the

camera to your Wi-Fi network using WPS. Press the WPS or QSS button on your router.

Within 2 minutes, press the WPS/RESET button on the camera for 1 second, then the

WPS LED will start flashing quickly. When the LED becomes solid on, the camera is

successfully connected to the router wirelessly..

 Used as the RESET button:

With the camera powered on, press

and hold the WPS/RESET button for more than 5

seconds until the System LED turns

off. Then release the button and wait the camera to

reset to its factory default settings.

 Ventilation Holes: These holes are used for heat dissipation.