Tp-Link NC250 V1 [31/47] Advanced wireless extender

NC220

NC230

NC250

Day/Night Cloud Camera, 300Mbps Wi-Fi

HD Day/Night Wi-Fi Cloud Camera

HD Day/Night Cloud Camera, 300Mbps Wi-Fi



Note:

The name must be exactly the same as that used in the wireless access point, or the connection

will not be established. Leaving this field blank means the camera will attempt to access the

nearest open network. If your PC wants

to access the camera, make sure your PC and the camera

are connecting to the same wireless network.

4. Select the wireless security mode used by your wireless network from the drop-down list. The

security mode and its corresponding settings must be exactly the same as that used in the

wireless network.

5. Click Connect and a screen will pop up. Click Change on the pop-up screen.

6. Click OK on the pop–up screen to finish wireless connection procedure.

7. To start using camera wirelessly, unplug its Ethernet cable.

4.4.4 Advanced > Wireless Extender

On this page, you can setup and configure the wireless network extending feature of your camera.

Wireless extender function allows your camera to extend the range of your existing wireless

network. You can use the same network name and settings as the existing wireless network, or

you can create a new one.

The camera’s wireless extender function is disabled by default. If you want to use this function, just

select the Enable option.

 Host Wireless Network Name: Displays the name of the wireless network which your

camera is connected to. It is read-only.

 Extended Wireless Network Name: Name of the wireless network that your camera will

extend.