Owon AG1012 [27/40] To output dc

5.Front Panel Operation

(2) Enter the storage path of the desired waveform file. Turn the knob or press /

direction key to select the desired waveform file.

(3) Choose Recall output.

How to Edit a Stored Waveform

(1) Enter the operation menu: Press →Editable Wform →Edit Wform.

(2) Enter the storage path of the desired waveform file. Turn the knob or press /

direction key to select the desired waveform file.

(3) Choose Recall suppress.

How to Delete a Stored Waveform

(1) Press Save function button to enter the file system.

(2) Enter the storage path of the desired waveform file. Turn the knob or press /

direction key to select the desired waveform file.

(3) Choose Delete.

To Output DC

(1) Press CH1/2 to select the channel that you want to output DC, then press DC

button.

(2) Turn the knob to change the value; or press the number keys to input the desired

value, press F1 or F2 to select the unit.

(3) Press CH1 or CH2 to turn on/off DC ouput of the corresponding channel.

To recall wave file

This function can read the waveform file with suffix of (*.ota) which is cut from SDS series

oscilloscope manufactured by OWON and saved to USB device or cut by the software of

OWON oscilloscope. Then the waveform generator can output the same signal as the cut

wave.

Use SDS Series oscilloscope manufactured by OWON to cut wave:

(1) Connect USB device to SDS series oscilloscope.

(2) Press Save to call out the save menu.

(3) Press the H1 button, the Type menu will display at the left of the screen, turn the M

knob to choose Cut Wave for type.

(4) Move cursor1 and cursor2 to choose the range of wave to be cut.

(5) Press the H2 button, and the input keyboard will pop up. The default name is the

current system date. Turn M knob to choose the keys, and press M knob to input the

chosen keys. Choose and press Enter key of the keyboard to end the input and store

the file with the current name to USB device.