Tp-Link TL-SG108E V1 [16/84] Logging into the switch

User Guide 12

Getting Started Discovering Switches

Subnet Mask Enter the subnet mask of the switch. The default subnet mask of the

switch is 255.255.255.0.

Default Gateway Enter the default gateway of the switch.



Using DHCP

Select DHCP setting as Enable. Then the switch can obtain IP address, subnet mask,

and default gateway from the DHCP server in the network.

4) Input the user name and password. The user name and password are both admin by

default.

5) Click Apply.

3.3 Logging Into the Switch

Note:

When the switch is not in the same subnet with the PC, you cannot log into the switch, though the

utility can discover the switch. It is recommended to set the IP address of the switch in the same

subnet as the PC before logging into the switch.

Select the switch which you want to log into, and click to load the following page.

Figure 3-3 Logging Into the Switch

Follow these steps to log into the switch.

1) Input the user name and password. The user name and password are both admin by

default.

2) (Optional) Check Remember Me to remember the user name and password.

3) Click Login. The following page will be displayed and you can configure the switch on

this page. The model and hardware version of the switch that you are configuring are