![Tp-Link TL-SG1024DE V3 [15/24] Installation tools](/img/pdf.png)
Tp-Link TL-SG1024DE V3 [15/24] Installation tools
![Tp-Link TL-SG1016DE V3 [15/24] Installation tools](/views2/1473093/page15/bgf.png)
11
Unmanaged/Easy Smart Rackmountable Switch
Installation
Extremely high voltage currents can be produced instantly when lightning occurs and the air in the
electric discharge path can be instantly heated up to 20,000
°C
. As this instant current is strong
enough to damage electronic devices, more effective lightning protection measures should be
taken.
■
Ensure that the rack and the device are well earthed.
■
Make sure the power socket has a good contact with the ground.
■
Keep a reasonable cabling system and avoid induced lightning.
■
Use the signal SPD (Surge Protective Device) when wiring outdoor.
Note:
For detailed lightning protection measures, refer to the Lightning Protection Guide from the
Related Documents of our website:
https://www.tp-link.com/en/conguration-guides/lightning_protection_guide/?congurationId=2962
Installation Site
When installing the device on a rack or a flat workbench, attach much importance to the following
items:
■
The rack or workbench is flat, stable, and sturdy enough to support the weight of 5.5 kg at least.
■
The rack or workbench has a good ventilation system. The equipment room is well ventilated.
■
The rack is well grounded. Keep the device less than 1.5 meters away from the power socket.
2.3 Installation Tools
■
Phillips screwdriver
■
ESD-preventive wrist wrap
■
Cables
Note:
These tools are not included with our product. If needed, you can purchase them separately.
2.4 Product Installation
■
Desktop Installation
To install the device on the desktop, follow the steps:
1. Set the device on a flat surface which is strong enough to support the entire weight of the device
with all fittings.
2. Remove the adhesive backing papers from the rubber feet.
3. Turnover the device and attach the supplied rubber feet to the recessed areas on the bottom at
each corner of the device.
Содержание
- About this installation guide 3
- Audience 3
- Conventions 3
- Related document 3
- Appendix a troubleshooting 16 4
- Appendix b specifications 17 4
- Chapter 1 introduction 1 4
- Chapter 2 installation 9 4
- Chapter 3 connection 13 4
- Contents 4
- Appearance 5
- Chapter 1 introduction 5
- Front panel 5
- Product overview 5
- Introduction 6
- The front panel of tl sf1016ds is shown as the following figure 6
- The front panel of tl sf1024d is shown as the following figure 6
- The front panel of tl sf1048 is shown as the following figure 6
- The front panel of tl sg1008 is shown as the following figure 6
- Unmanaged easy smart rackmountable switch 6
- Introduction 7
- The front panel of tl sg1016 is shown as the following figure 7
- The front panel of tl sg1016s is shown as the following figure 7
- The front panel of tl sg1024 is shown as the following figure 7
- The front panel of tl sg1048 is shown as the following figure 7
- Unmanaged easy smart rackmountable switch 7
- Introduction 8
- Reset 10 100 1000mbps rj45 port leds 8
- The front panel of tl sg1016d is shown as the following figure 8
- The front panel of tl sg1016de is shown as the following figure 8
- The front panel of tl sg1024d is shown as the following figure 8
- The front panel of tl sg1024s is shown as the following figure 8
- Unmanaged easy smart rackmountable switch 8
- Introduction 9
- The front panel of tl sg1008pe is shown as the following figure 9
- The front panel of tl sg1016pe is shown as the following figure 9
- The front panel of tl sg1024de is shown as the following figure 9
- The front panel of tl sg1218mpe is shown as the following figure 9
- Unmanaged easy smart rackmountable switch 9
- Unmanaged easy smart rackmountable switch 10
- 100 1000mbps rj45 port 11
- 100mbps rj45 port 11
- Designed to connect to the device with a bandwidth of 10 mbps 100 mbps or 1000 mbps for tl sg1016pe and tl sg1008pe ports 1 to 8 can also provide power for pds for tl sg1218mpe ports 1 to 16 can also provide power for pds 11
- Designed to connect to the device with a bandwidth of 10 mbps or 100 mbps 11
- Designed to install the sfp module tl sg1218mpe features 2 individual sfp ports which support 1000m sfp module connection only 11
- Note only tl sg1016de tl sg1016pe tl sg1024de tl sg1218mpe has a reset button 11
- Press this button for five seconds or above to reset the switch back to factory default settings 11
- Sfp port 11
- Unmanaged easy smart rackmountable switch 11
- Grounding terminal 12
- Kensington security slot 12
- Power socket 12
- Rear panel 12
- Chapter 2 installation 13
- Package contents 13
- Safety precautions 13
- Site requirements 14
- Desktop installation 15
- Installation tools 15
- Product installation 15
- Rack installation 16
- Chapter 3 connection 17
- Ethernet port 17
- Sfp port 17
- Verify installation 17
- Accessing the switch 18
- Initialization 18
- Power on 18
- Using the web based gui 18
- Using the configuration utility 19
- Appendix a troubleshooting 20
- Please try the following 20
- Q1 what could i do if i forgot the username and password of the switch 20
- Q2 what should i do if i cannot access the web management page 20
- Q3 why does the power pwr led work abnormally 20
- Q4 why is the link act led not lit while a device is connected to the corresponding port 20
- The power pwr led should be lit up when the power system works normally if the power pwr led worked abnormally please try the following 20
- With the switch powered on press the reset button for at least 5 seconds to reset the system the system will be reset to the factory default settings and the default login user name and password are both admin 20
- Appendix b specifications 21
- Ce mark warning 23
- Eu declaration of conformity 23
- Safety information 23
Похожие устройства
- Tp-Link TL-SG1024DE V3 Configuration Guide
- Tp-Link TL-SG1024DE V3 Руководство пользователя
- Tp-Link TL-SG1024DE V3 Rackmount Switch_EU2_12Languages__ Installation Guide
- Tp-Link TL-SG1024DE V3 Руководство по быстрому старту
- Tp-Link TL-SG1024DE V2 Configuration Guide
- Tp-Link TL-SG1024DE V2 Руководство пользователя
- Tp-Link TL-SG1024DE V2 Инструкция по установке
- Tp-Link TL-SG1024DE V2 Unmanaged Pro Configuration Utility
- Tp-Link TL-SG1024DE V2 Руководство по быстрому старту
- Tp-Link TL-SG1024DE V2 Rackmount Switch_EU2_12Languages__ Installation Guide
- Alpine APF-800MOST Руководство по обслуживанию
- Tp-Link TL-SG1024DE V1 Руководство пользователя
- Tp-Link TL-SG1024DE V1 Configuration Guide
- Tp-Link TL-SG1024DE V1 Руководство по быстрому старту
- Tp-Link TL-SG1024DE V1 Unmanaged Pro Configuration Utility
- Tp-Link TL-SG1024DE V1 Rackmount Switch_EU2_12Languages__ Installation Guide
- Alpine APF-X100BM Схема подключения
- Alpine APF-X300VW Краткое руководство
- Alpine APF-X100VW Схема подключения
- Alpine APF-V100GM Руководство пользователя