Beko CWB6410CR Руководство пользователя онлайн [5/76] 397339

Содержание

Electrical safety To get your product ready for use firstly you must have installation place and electric wiring prepared Later you may call Authorised Service nearest to you If it has a failure the product should not be operated without being repaired by the Authorised Service Agent There is the risk of electric shock Never connect the hood before installation is completed Never touch the plug with wet hands Do not unplug by pulling from the cable always hold by the plug to unplug Product must be disconnected from the mains during installation maintenance cleaning and repair procedures If the supply cord is damaged it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard Never connect power cable near to the hobs If melted down cable may lead to fire Any work on electrical equipment and systems may only be carried out by authorised and qualified persons In case of any damage switch off the product and disconnect it from the mains To do this turn off the fuse at home Make sure that fuse current is compatible with the product Never wash down the product with water There is the risk of electric shock Product safety The height between the lower surface of the hood and upper surface of the hob should not be less than 650 mm Never touch the hood s lamp after they operated for a long time Hot lamps may burn your hands Never operate the product without oil filter Never remove filters when the product is in use Avoid big flames beneath the product Otherwise particles on oil filter may flame up and cause fire Turn on the hobs after placing pans or pots on Otherwise rising temperature may deform certain parts of your product Turn off the hobs before taking away pans or pots Avoid inflammable materials under the hood Do not expose the product to open flames beneath it It can cause oils accumulated in the filter to catch fire Do not operate the product without filter 5 EN