![Zyxel WRE6606 [12/113] Wps button](/img/pdf.png)
Zyxel WRE6606 [12/113] Wps button
![Zyxel WRE6606 [12/113] Wps button](/views2/1476915/page12/bgc.png)
Chapter 1 Introduction
WRE6606 User’s Guide
12
1.4 WPS Button
The WPS button can be used to begin Wi-Fi Protected Setup (WPS), reboot the WRE6606 while keeping
it’s configuration or reset the WRE6606 to factory default configuration.
1.4.1 Wi-Fi Protected Setup
Your WRE6606 supports Wi-Fi Protected Setup (WPS), which is an easy way to set up a secure wireless
network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Each WPS connection works between two devices. Both devices must
support WPS (check each device’s documentation to make sure).
Depending on the devices you have, you can either press a button (recommended) on the device
itself, or in its configuration utility or enter a PIN (a unique Personal Identification Number that allows one
device to authenticate the other) in each of the two devices. When WPS is activated on a device, it has
two minutes to find another device that also has WPS activated. Then, the two devices connect and set
up a secure network by themselves.
For more information on using WPS, see Section 10.10 on page 71.
Table 2 WPS Button Functions
ACTION RESULT
Press three times within 5
seconds
Turn off or turn on all LEDs.
AP Mode
Push the WPS button
once
The WRE6606 begins connecting to a wireless client via WPS. See Section 1.4 on page
12.
Hold for 5 to 10 seconds The WRE6606 keeps its configuration and reboots.
Hold for more than 10
seconds
The WRE6606 resets its configuration to factory defaults and reboots. Also, the power
LED will be blinking. See Section 14.5 on page 97.
Repeater Mode
Push the WPS button
once
The WRE6606 begins connecting to the upper router via WPS.
Push twice within 5
seconds
The WRE6606 begins connecting to a wireless client via WPS. See Section 1.4 on page
12.
Hold for 5 to 10 seconds The WRE6606 keeps its configuration and reboots.
Hold for more than 10
seconds
The WRE6606 resets its configuration to factory defaults and reboots. Also, the power
LED will be blinking. See Section 14.5 on page 97.
Client Mode
Push the WPS button
once
The WRE6606 begins connecting to an access point via WPS.
Hold for 5 to 10 seconds The WRE6606 keeps its configuration and reboots.
Hold for more than 10
seconds
The WRE6606 resets its configuration to factory defaults and reboots. Also, the power
LED will be blinking. See Section 14.5 on page 97.
Содержание
- Default login details 1
- User s guide 1
- Wre6606 1
- Important 2
- Keep this guide for future reference 2
- Read carefully before use 2
- Related documentation 2
- Contents overview 3
- Technical reference 3 3
- User s guide 3
- Chapter 1 introduction 4
- Chapter 2 the web configurator 3 4
- Chapter 3 wre6606 modes 8 4
- Chapter 4 access point mode 0 4
- Contents overview 4
- Part i user s guide 8 4
- Table of contents 4
- Chapter 5 client mode 6 5
- Chapter 6 repeater mode 0 5
- Chapter 7 eazy123 wizard setup 6 5
- Chapter 8 tutorials 4 5
- Part ii technical reference 53 5
- Chapter 10 wireless lan 6 6
- Chapter 11 lan 8 6
- Chapter 12 one connect 0 6
- Chapter 13 maintenance 2 6
- Chapter 9 monitor 4 6
- Appendix a customer support 98 7
- Appendix b legal information 104 7
- Chapter 14 troubleshooting 3 7
- Index 11 7
- User s guide 8
- Introduction 9
- Overview 9
- Securing the wre6606 9
- Front panel 10
- Wps button 10
- Chapter 1 introduction 11
- Led color status description 11
- Table 1 front panel leds 11
- The following table describes the leds 11
- Wre6606 user s guide 11
- Action result 12
- Chapter 1 introduction 12
- Depending on the devices you have you can either press a button recommended on the device itself or in its configuration utility or enter a pin a unique personal identification number that allows one device to authenticate the other in each of the two devices when wps is activated on a device it has two minutes to find another device that also has wps activated then the two devices connect and set up a secure network by themselves 12
- For more information on using wps see section 10 0 on page 71 12
- Table 2 wps button functions 12
- The wps button can be used to begin wi fi protected setup wps reboot the wre6606 while keeping it s configuration or reset the wre6606 to factory default configuration 12
- Wi fi protected setup 12
- Wps allows you to quickly set up a wireless network with strong security without having to configure security settings manually each wps connection works between two devices both devices must support wps check each device s documentation to make sure 12
- Wps button 12
- Wre6606 user s guide 12
- Your wre6606 supports wi fi protected setup wps which is an easy way to set up a secure wireless network wps is an industry standard specification defined by the wi fi alliance 12
- Accessing the web configurator 13
- Login screen 13
- Overview 13
- The web configurator 13
- Chapter 2 the web configurator 14
- Figure 2 login screen 14
- Figure 3 change password screen 14
- Label description 14
- Password screen 14
- Table 3 login screen 14
- The following table describes the labels in this screen 14
- Wre6606 user s guide 14
- You should see a screen asking you to change your password highly recommended as shown next 14
- Chapter 2 the web configurator 15
- Figure 4 home screen 15
- Home screen 15
- If you have previously logged into the web configurator but did not click logout you may be redirected to the home screen 15
- Label description 15
- Note reset the wre6606 if you forget your password or ip address or you cannot access the web configurator see section 14 on page 97 15
- Table 4 change password screen 15
- Table 5 home screen 15
- The following table describes the labels in this screen 15
- The home screen displays as follows 15
- Wre6606 user s guide 15
- You can also open this screen by clicking home in the web configurator screens 15
- Navigating the web configurator 16
- Time date edit 16
- Navigation panel 17
- Title bar 17
- Device modes 18
- Overview 18
- Wre6606 modes 18
- Changing operating mode 19
- Access point mode 20
- Overview 20
- What you can do 20
- What you need to know 20
- Ap mode status screen 21
- Configuring your wlan lan and maintenance settings 21
- Setting your wre6606 to ap mode 21
- Chapter 4 access point mode 22
- Figure 10 status screen access point mode 22
- Label description 22
- Table 9 status screen access point mode 22
- The following table describes the labels shown in the status screen 22
- Wre6606 user s guide 22
- Chapter 4 access point mode 23
- Label description 23
- Navigation panel 23
- Table 9 status screen access point mode continued 23
- The following screen and table show the features you can configure in access point mode 23
- Use the menu in the navigation panel to configure wre6606 features in access point mode 23
- Wre6606 user s guide 23
- Chapter 4 access point mode 24
- Figure 11 menu access point mode 24
- Link tab function 24
- Table 10 navigation panel access point mode 24
- The following table describes the sub menus 24
- Wre6606 user s guide 24
- Chapter 4 access point mode 25
- Link tab function 25
- Table 10 navigation panel access point mode 25
- Wre6606 user s guide 25
- Client mode 26
- Overview 26
- Setting your wre6606 to client mode 26
- What you can do 26
- What you need to know 26
- Client mode status screen 27
- Note the client mode ip address is always the same as the access point mode ip address if you changed the ip address of your wre6606 while in access point mode use this ip address in client mode 27
- Note you have to log into the web configurator again when you change modes as soon as you do your wre6606 is already in client mode 27
- Chapter 5 client mode 28
- Label description 28
- Navigation panel 28
- Table 11 status screen access point mode continued 28
- The following screen and table show the features you can configure in client mode 28
- Use the menu in the navigation panel to configure wre6606 features in client mode 28
- Wre6606 user s guide 28
- Chapter 5 client mode 29
- Figure 14 menu client mode 29
- Link tab function 29
- Table 12 navigation panel access point mode 29
- The following table describes the sub menus 29
- Wre6606 user s guide 29
- Overview 30
- Repeater mode 30
- What you can do 30
- Configuring your wlan lan and maintenance settings 31
- Lan client 31
- Note if a client is connected to the wre6606 through the wired ethernet connection the client can only access the 2 ghz wi fi in the following figure the lan client is only able to communicate with devices in the 2 ghz wireless network 31
- Note you have to log in to the web configurator again when you change modes as soon as you do your wre6606 is already in repeater mode 31
- Repeater mode status screen 31
- Setting your wre6606 to repeater mode 31
- What you need to know 31
- Chapter 6 repeater mode 32
- Figure 16 status repeater mode 32
- Label description 32
- Table 13 status screen repeater mode 32
- The following table describes the labels shown in the status screen 32
- Wre6606 user s guide 32
- Chapter 6 repeater mode 33
- Label description 33
- Table 13 status screen repeater mode 33
- Wre6606 user s guide 33
- Chapter 6 repeater mode 34
- Figure 17 menus repeater mode 34
- Label description 34
- Link tab function 34
- Navigation menus 34
- Table 13 status screen repeater mode 34
- Table 14 menus repeater mode 34
- The following screen and table show the features you can configure in repeater mode 34
- The following table describes the sub menus 34
- Use the menu in the navigation panel to configure wre6606 features in repeater mode 34
- Wre6606 user s guide 34
- Chapter 6 repeater mode 35
- Link tab function 35
- Table 14 menus repeater mode 35
- Wre6606 user s guide 35
- Eazy123 wizard setup 36
- Overview 36
- Use the wre6606 as a repeater 36
- Use the wre6606 as an ap 39
- Use the wre6606 as a wireless client 41
- Connecting to the internet from an access point 44
- Connecting to the wre6606 s wireless network using wps 44
- Overview 44
- Tutorials 44
- Note it doesn t matter which button is pressed first you must press the second button within two minutes of pressing the first one 45
- Note your wre6606 has a wps button located on its panel as well as a wps button in its configuration utility both buttons have exactly the same function you can use one or the other 45
- Push button configuration pbc 45
- Communication 46
- Pin configuration 46
- Security info 46
- Wireless client 46
- Within 2 minutes 46
- Authentication by pin 47
- Communication 47
- Connecting the wre6606 in repeater mode to an ap 47
- Security info 47
- Within 2 minutes 47
- Selecting an ap from an automatically detected list 48
- Selecting an ap by manually entering security information 49
- Connecting the wre6606 in client mode to an ap or wireless router 51
- Technical reference 53
- Monitor 54
- Overview 54
- Packet statistics screen 54
- What you can do 54
- Chapter 9 monitor 55
- Label description 55
- Packet statistics 55
- The following table describes the labels in this screen 55
- Wre6606 user s guide 55
- Overview 56
- What you can do 56
- What you should know 56
- Wireless lan 56
- Encryption 57
- Mac address list 57
- Note it is recommended that wireless networks use wpa psk or stronger encryption ieee 802 x and wep encryption are better than none at all but it is still possible for unauthorized devices to figure out the original information pretty quickly 57
- Wireless security overview 57
- General wireless lan screen 58
- Guest wlan 58
- Note note only ap mode supports guest wlan 58
- Note note the home or company network n and guest wlan network are independent networks 58
- Note if you are configuring the wre6606 from a computer connected to the wireless lan and you change the wre6606 s ssid channel or security settings you will lose your wireless connection when you press apply to confirm you must then change the wireless settings of your computer to match the wre6606 s new settings 59
- Chapter 10 wireless lan 60
- General 60
- Label description 60
- The following table describes the general wireless lan labels in this screen 60
- Wre6606 user s guide 60
- Chapter 10 wireless lan 61
- General continued 61
- Label description 61
- No security 61
- Note if the wps function is enabled default only no security and wpa2 psk are available in this field 61
- Note if you do not enable any wireless security on your wre6606 your network is accessible to any wireless networking device that is within range 61
- Select no security to allow wireless clients to communicate with the access point without any data encryption 61
- The screen varies depending on what you select in the security mode field 61
- Wireless security 61
- Wre6606 user s guide 61
- Wep encryption 62
- Chapter 10 wireless lan 63
- General static wep 63
- Label description 63
- The following table describes the wireless lan security labels in this screen 63
- Wre6606 user s guide 63
- Chapter 10 wireless lan 64
- General static wep continued 64
- General wpa psk wpa2 psk 64
- Label description 64
- Select wpa psk or wpa2 psk from the security mode list 64
- The following table describes the labels in this screen 64
- Wpa psk wpa2 psk 64
- Wre6606 user s guide 64
- Ap select 65
- Ap select repeater mode 65
- Ap select screen 65
- Chapter 10 wireless lan 65
- General wpa psk wpa2 psk continued 65
- Label description 65
- Use this screen available both in client mode and repeater mode to choose an access point that you want the wre6606 to connect to you should know the security settings of the target ap 65
- Wre6606 user s guide 65
- Ap select client mode 66
- Ap select client mode and repeater mode 66
- Chapter 10 wireless lan 66
- Enter a wi fi key 66
- If wireless security is enabled on the selected ap the following screen displays after you click continue in the ap select screen enter the ap s wi fi key and click continue 66
- Label description 66
- The following table describes the labels in this screen 66
- Wre6606 user s guide 66
- Choose ap network manually 67
- Set up the wre6606 s wlan for clients 67
- Complete the ap and wlan setup 68
- Chapter 10 wireless lan 69
- Label description 69
- Mac filter 69
- Mac filter the screen appears as shown 69
- The following table describes the labels in this menu 69
- The mac filter screen allows you to specify which devices are allowed to access the wre6606 while denying access to all unspecified devices every ethernet device has a unique mac media access control address the mac address is assigned at the factory and consists of six pairs of hexadecimal characters for example 00 a0 c5 00 00 02 you need to know the mac address of the devices to configure this screen 69
- Wre6606 user s guide 69
- Advanced 70
- Advanced the screen appears as shown 70
- Chapter 10 wireless lan 70
- Label description 70
- The following table describes the labels in this screen 70
- Use this screen to configure advanced wireless lan parameters 70
- Wireless lan advanced screen 70
- Wre6606 user s guide 70
- Note wireless clients cannot use wps to set up a wireless network with the wre6606 in universal repeater mode 71
- Quality of service qos screen 71
- Wps screen 71
- Chapter 10 wireless lan 72
- Label description 72
- The following table describes the labels in this screen 72
- Wps ap mode 72
- Wps repeater mode 72
- Wre6606 user s guide 72
- Chapter 10 wireless lan 73
- Label description 73
- Note after you click wps on this screen you have to press a similar button in the wireless station utility within 2 minutes to add the second wireless station you have to press these buttons on both device and the wireless station again after the first 2 minutes 73
- Wps continued 73
- Wps device 73
- Wps device repeater mode 73
- Wps device screen 73
- Wre6606 user s guide 73
- Scheduling screen 74
- Chapter 10 wireless lan 75
- Guest wlan screen 75
- Label description 75
- Scheduling 75
- The following table describes the labels in this screen 75
- This screen available in ap mode only allows you to enable and configure multiple wireless networks and guest wireless network settings on the wre6606 75
- Wre6606 user s guide 75
- You can configure up to four ssids to enable multiple bsss basic service sets on the wre6606 this allows you to use one access point to provide several bsss simultaneously you can then assign varying 75
- Chapter 10 wireless lan 76
- Guest wlan 76
- Label description 76
- Note if the wps function is enabled default only no security and wpa2 psk are available in this field 76
- Security types and to different ssids wireless clients can use different ssids to associate with the same access point 76
- The following table describes the labels in this screen 76
- Wre6606 user s guide 76
- Chapter 10 wireless lan 77
- Guest wlan 77
- Label description 77
- Wre6606 user s guide 77
- Lan ip screen 78
- Overview 78
- Chapter 11 lan 79
- Ip continued 79
- Label description 79
- Wre6606 user s guide 79
- One connect 80
- One connect screen 80
- Overview 80
- What you can do 80
- Chapter 12 one connect 81
- Label description 81
- Oneconnect 81
- The following table describes the labels in this screen 81
- Wre6606 user s guide 81
- General 82
- Maintenance 82
- Overview 82
- What you can do 82
- Chapter 13 maintenance 83
- General 83
- Label description 83
- Password 83
- System password screen 83
- System the following screen displays 83
- The following table describes the labels in this menu 83
- The following table describes the labels in this screen 83
- Time screen 83
- Time the screen appears as shown 83
- Wre6606 user s guide 83
- Chapter 13 maintenance 84
- Label description 84
- The following table describes the labels in this screen 84
- Wre6606 user s guide 84
- Chapter 13 maintenance 85
- Find firmware at www zyxel com in a file that usually uses the system model name with a bin extension e g wre6606 bin the upload process uses http hypertext transfer protocol and may take up to two minutes after a successful upload the system will reboot 85
- Firmware upgrade follow the instructions in this screen to upload firmware to your wre6606 85
- Firmware upgrade screen 85
- Label description 85
- Time continued 85
- Wre6606 user s guide 85
- After you see the firmware upgrading screen wait until the upgrade process is complete 86
- Chapter 13 maintenance 86
- Firmware upgrade 86
- Label description 86
- Note do not turn off the wre6606 while firmware upload is in progress 86
- The following table describes the labels in this screen 86
- Wre6606 user s guide 86
- Backup restore screen 87
- Backup configuration 88
- Note do not turn off the wre6606 while configuration file upload is in progress 88
- Restore configuration 88
- Back to factory defaults 89
- Restart screen 89
- System mode 89
- Chapter 13 maintenance 90
- Label description 90
- Repeater broadcasting behavior 90
- System mode 90
- The following table describes the labels in this menu 90
- The following terms are used to describe the broadcasting behavior in repeater mode 90
- The wre6606 in repeater mode enables you to extend the range of your dual band ap or wireless router to eliminate dead spots in your wireless network you can choose from normal mode range boost or speed boost modes 90
- Up the connection from the wre6606 in repeater mode to the ap or wireless router 90
- Wre6606 user s guide 90
- Normal mode 91
- Range boost mode 91
- Speed boost mode 91
- Power hardware connections and leds 93
- Troubleshooting 93
- I can see the login screen but i cannot log in to the wre6606 94
- I cannot see or access the login screen in the web configurator 94
- I forgot the password 94
- Wre6606 access and login 94
- I cannot access the internet 95
- I cannot access the internet anymore i had access to the internet with the wre6606 in repeater mode but my internet connection is not available anymore 95
- Internet access 95
- The internet connection is slow or intermittent 95
- Can i set up the wre6606 in repeater mode if i connect it to the router or access point with an ethernet cable 96
- I cannot access the wre6606 in ap or repeater mode or ping any computer from the wlan 96
- I enabled a wireless mac filter or wireless firewall rule on my router what should i do when installing the wre6606 in repeater mode 96
- My wireless device keeps asking me for my wi fi network password and i am sure i have entered the correct password 96
- Wireless problems 96
- Reset the wre6606 if you forget your password or ip address or you cannot access the web configurator 97
- Resetting the wre6606 to its factory defaults 97
- Customer support 98
- Ppendi 98
- Austria 99
- Belarus 99
- Europe 99
- Malaysia 99
- Pakistan 99
- Philippines 99
- Singapore 99
- Taiwan 99
- Thailand 99
- Vietnam 99
- Belgium 100
- Bulgaria 100
- Czech republic 100
- Denmark 100
- Estonia 100
- Finland 100
- France 100
- Germany 100
- Hungary 100
- Latvia 101
- Lithuania 101
- Netherlands 101
- Norway 101
- Poland 101
- Romania 101
- Russia 101
- Slovakia 101
- Sweden 101
- Switzerland 101
- Argentina 102
- Brazil 102
- Ecuador 102
- Israel 102
- Latin america 102
- Middle east 102
- Turkey 102
- Ukraine 102
- Africa 103
- Australia 103
- North america 103
- Oceania 103
- South africa 103
- Legal information 104
- Ppendi 104
- Appendix b legal information 105
- Declaration of conformity with regard to eu directive 2014 53 eu radio equipment directive red 105
- Déclaration d exposition aux radiations 105
- European union 105
- Industry canada radiation exposure statement 105
- Industry canada rss gen rss 247 statement 105
- Wre6606 user s guide 105
- Appendix b legal information 106
- Wre6606 user s guide 106
- Appendix b legal information 107
- List of national codes 107
- Safety warnings 107
- Wre6606 user s guide 107
- Appendix b legal information 108
- Environment statement 108
- Erp energy related products 108
- European union disposal and recycling information 108
- Wre6606 user s guide 108
- About the symbols 109
- Appendix b legal information 109
- Wre6606 user s guide 109
- 台灣 109
- Appendix b legal information 110
- Explanation of the symbols 110
- Open source licenses 110
- Registration 110
- Viewing certifications 110
- Wre6606 user s guide 110
- Zyxel limited warranty 110
Похожие устройства
- Zyxel WRE6606 Руководство по быстрому старту
- Qundis Q caloric Технический паспорт
- Qundis Q caloric Руководство по монтажу и эксплуатации
- Qundis Q heat US Технический паспорт
- Qundis Q heat US Руководство по монтажу и эксплуатации
- Qundis Q heat QDS Руководство по монтажу и эксплуатации
- Qundis Q heat QDS Технический паспорт
- Qundis Q heat IST Руководство по монтажу и эксплуатации
- Qundis Q heat IST Технический паспорт
- Qundis Q gateway 4 UMTS Руководство по монтажу и эксплуатации
- Qundis Q log 5.5 Руководство по монтажу и эксплуатации
- Платон БК-СВП 1.0 Приказ Росстандарта № 1264 от 07.09.2016 об утверждении типа СИ
- Платон БК-СВП 1.0 Групповое Свидетельство о _первичной_ поверке
- Платон БК-СВП 1.0 Декларация ТР ТС20
- Платон БК-СВП 1.0 Сертификат СКЗИ MS KEY
- Платон БК-СВП 1.0 Свидетельство об утверждении типа СИ
- Платон БК-СВП 1.0 GSM
- Платон БК-СВП 1.0 Декларация ТР ТС05
- Платон БК-СВП 1.0 Технический паспорт
- Платон БК-СВП 1.0 Сертификат РСТ ГОСТ12.007.0 ГОСТ16019_2001_В4_ IP54
Скачать
Случайные обсуждения