Bosch GSA 18 V-LI 0.601.64J.005 Инструкция по эксплуатации онлайн [21/256] 408
![Bosch GSA 18 V-LI 0.601.64J.005 Инструкция по эксплуатации онлайн [21/256] 408](/views2/1000482/page21/bg15.png)
English | 21
Bosch Power Tools 2 609 932 638 | (4.7.08)
For certain work, the saw blade 1 can also be
turned through 180° (with the teeth pointed up-
wards) and re-inserted again.
Ejecting the Saw Blade (see figure B)
f When ejecting the saw blade, hold the ma-
chine in such a manner that no persons or
animals can be injured by the ejected saw
blade.
Turn the locking sleeve 4 approx. 90° in the di-
rection of the arrow. The saw blade 1 is ejected.
Dust/Chip Extraction
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
– Provide for good ventilation of the work-
ing place.
– It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Operation
Starting Operation
Inserting the Battery
f Use only original Bosch lithium ion batter-
ies with the voltage listed on the nameplate
of your power tool. Using other batteries can
lead to injuries and pose a fire hazard.
To protect the machine against unintentional
starting, set the stroke speed selector switch 6
to the centre position. Insert the charged bat-
tery 9 from the front into the handle of the pow-
er tool. Push the battery completely into the
handle until the red stripe can no longer be seen
and the battery is securely locked.
Changing the Stroke Speed Setting
The stroke speed setting of the power tool can
be changed with the stroke speed selector
switch 6. However, this is not possible when the
On/Off switch 7 is pressed.
Stroke speed selector switch 6
– central posi-
tion:
The safety lock is activated.
The On/Off switch 7 is blocked and
the machine is secured against being
switched on unintentionally.
Stroke speed selector switch 6
– left:
1. Gear, low stroke speed.
The low stroke speed is suitable for
sawing hard materials such as steel,
non-ferrous metal, hard plastics or for
precision cuts in wood and plunge
cutting.
The low stroke speed enables sawing
with less vibrations.
Stroke speed selector switch 6
– right:
2. Gear, high stroke speed.
The high stroke speed is suitable for
sawing soft materials.
The high stroke speed enables quick-
er operational progress, e. g., for
coarse cuts in wood.
Switching On and Off
To start the machine, press the On/Off switch 7
and keep it pressed.
To switch off the machine, release the On/Off
switch 7.
OBJ_BUCH-760-002.book Page 21 Friday, July 4, 2008 11:32 AM
Похожие устройства
- Synology DS411j Инструкция по эксплуатации
- Alesis RA 150 Инструкция по эксплуатации
- Acer Aspire One D255-2DQGkk Инструкция по эксплуатации
- Mystery MTV-1911LW Инструкция по эксплуатации
- Vitek VT-3624 Инструкция по эксплуатации
- Samsung MAX-ZS720 Инструкция по эксплуатации
- Bosch GSA 10.8V-LI 0.601.64L.901 Инструкция по эксплуатации
- Synology Disk Station DS211+ Инструкция по эксплуатации
- Alesis RA 300 Инструкция по эксплуатации
- Sharp LC-26SH7 RUBK Инструкция по эксплуатации
- Acer AO533-138kk Инструкция по эксплуатации
- Bosch WLG20060OE Инструкция по эксплуатации
- Vitek VT-3623 Инструкция по эксплуатации
- Samsung MAX-ZJ730 Инструкция по эксплуатации
- Bosch GSA 10.8V-LI 0.601.64L.902 Инструкция по эксплуатации
- Synology DS712+ Инструкция по эксплуатации
- Alesis RA 500 Инструкция по эксплуатации
- Panasonic TX-PR42U30 Инструкция по эксплуатации
- Vitek VT-3625 Инструкция по эксплуатации
- Samsung MAX-ZJ650 Инструкция по эксплуатации