Acer Aspire One D255-2DQGkk [32/52] Installing and removing the battery pack

English

Follow these steps again until the battery has been charged and

discharged three times.

Use this conditioning process for all new batteries, or if a battery hasn't

been used for a long time. If the computer is to be stored for more

than two weeks, you are advised to remove the battery pack from the

unit.

Warning: Do not expose battery packs to temperatures below 0°C

(32°F) or above 45°C (113°F). Extreme temperatures may adversely

affect the battery pack.

By following the battery conditioning process you condition your

battery to accept the maximum possible charge. Failure to follow this

procedure will prevent you from obtaining the maximum battery

charge, and will also shorten the effective lifespan of the battery.

In addition, the useful lifespan of the battery is adversely affected by

the following usage patterns:

• Using the computer on constant AC power with the battery

inserted. If you want to use constant AC power, you are advised to

remove the battery pack after it is fully charged.

• Not discharging and recharging the battery to its extremes, as

described above.

• Frequent use; the more you use the battery, the faster it will reach

the end of its effective life. A standard computer battery has a life

span of about 300 charges.

Installing and removing the battery pack

Important! Before removing the battery from the unit, connect

the AC adapter if you want to continue using your computer.

Otherwise, turn off the computer first.

To install a battery pack:

1 Align the battery with the open battery bay; make sure that the

end with the contacts will enter first, and that the top surface of

the battery is facing up.

2 Slide the battery into the battery bay and gently push until the

battery locks in place.