Yamaha RX-A680 — precautions for Safe Use of Electronic Devices and Batteries [3/104]
![Yamaha RX-A680 [3/104] Power supply power cord](/views2/1486881/page3/bg3.png)
En 3
• Do not attempt to recharge batteries that are not intended to be charged. Charging could
cause the battery to burst or leak, which can cause blindness, chemical burns, or injury.
• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in
contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor.
Battery fluid is corrosive and may possibly cause loss of sight or chemical burns.
Wireless unit
• Do not use this unit near medical devices or inside medical facilities. Radio waves from this
unit may affect electro-medical devices.
• Do not use this unit within 15 cm (6 in) of persons with a heart pacemaker implant or a
defibrillator implant. Radio waves from this unit may affect electro-medical devices, such as
a heart pacemaker implant or defibrillator implant.
If you notice any abnormality
• If any of the following abnormalities occur, immediately turn off the power and disconnect
the power plug. If any of the following abnormalities occur, immediately turn off any
amplifiers and receivers.
- The power cord/plug is damaged.
- An unusual smell or smoke is emitted from the unit.
- Foreign material gets into the interior of the unit.
- There is a loss of sound during use.
- There is a crack or damage in the unit.
Continued use could cause electric shocks, a fire, or malfunctions. Immediately request an
inspection or repair from the dealer where you purchased the unit or from qualified Yamaha
service personnel.
• Be careful not to drop or apply strong impact to this unit. If you suspect the unit may have
been damaged due to dropping or impact, immediately turn off the power and pull the power
plug from the AC outlet. Failure to observe this may cause electric shocks, a fire, or
malfunctions. Immediately request an inspection from the dealer where you purchased the
unit or from qualified Yamaha service personnel.
CAUTION
This content indicates “risk of injury.”
Power supply/power cord
• Do not use an AC outlet where the power plug fits loosely when inserted. Failure to observe
this may cause a fire, electric shocks, or burns.
• When removing the electric plug from the unit or an AC outlet, always hold the plug itself
and not the cord. Pulling by the cord can damage it and cause electric shocks or a fire.
• Insert the power plug firmly all the way into the AC outlet. Using the unit when it is not
plugged in sufficiently can cause dust to accumulate on the plug, causing a fire or burns.
Installation
• Do not place the unit in an unstable position where it might accidentally drop or fall over and
cause injuries.
• Do not block this unit's ventilation holes (cooling slits). This unit has ventilation holes on the
top/side/bottom to prevent the internal temperature from becoming too high. Failure to
observe this may trap heat inside the unit, causing a fire or malfunctions.
• When installing this unit:
- Do not cover it with any cloth.
- Do not install it on a carpet or rug.
- Make sure the top surface faces up; do not install on its sides or upside down.
- Do not use the device in a confined, poorly-ventilated location.
Failure to observe the above may trap heat inside the unit, causing a fire or malfunctions.
Ensure that there is adequate space around the unit: at least 30 cm (11-3/4 in) on top,
20 cm (7-7/8 in) on the sides, and 20 cm (7-7/8 in) on the rear.
• Do not install the unit in places where it may come into contact with corrosive gases or salt
air
. Doing so may result in malfunction.
• Avoid being near the unit during a disaster, such as an earthquake. Since the unit may turn
over or fall and cause injury, quickly move away from the unit and go to a safe place.
• Before moving this unit, be sure to turn off the power switch and disconnect all connection
cables. Failure to observe this may damage the cables or cause you or someone else to
trip and fall.
• For proper installation of the outdoor antenna, make sure to have it done by the dealer from
where you purchased the unit or by qualified service personnel. Failure to observe this may
cause the installation to fall and result in injury. Installation requires special skills and
experience.
Hearing loss
• Do not use the unit/speakers or headphones for a long period of time at a high or
uncomfortable volume level, since this can cause permanent hearing loss. If you
experience any hearing loss or ringing in the ears, consult a physician.
• Before connecting the unit to other devices, turn off the power for all devices. Also, before
turning the power of all devices on or off, make sure that all volume levels are set to the
minimum. Failing to do so may result in hearing loss, electric shock, or device damage.
• When turning on the AC power in your audio system, always turn on the amplifier or
receiver LAST, to avoid hearing loss and speaker damage. When turning the power off, the
amplifier or receiver should be turned off FIRST for the same reason. Failure to observe the
above may cause hearing impairment or speaker damage.
Maintenance
• Remove the power plug from the AC outlet before cleaning the unit. Failure to observe this
may cause electric shocks.
Содержание
- Русский p.1
- Краткое руководство по началу работы p.1
- Quick start guide guide de démarrage rapide guía de inicio rápida p.1
- Français p.1
- Español p.1
- English p.1
- Av receiver ampli tuner audio vidéo av ресивер p.1
- Water warning p.2
- Warning p.2
- Precautions p.2
- Power supply power cord p.2
- Please read carefully before use be sure to follow these instructions p.2
- Maintenance and care p.2
- Fire warning p.2
- English p.2
- Do not disassemble p.2
- Battery use p.2
- Maintenance p.3
- Installation p.3
- If you notice any abnormality p.3
- Hearing loss p.3
- Caution p.3
- Wireless unit p.3
- This content indicates risk of injury p.3
- Power supply power cord p.3
- Power supply power cord p.4
- Notice p.4
- Installation p.4
- Indicates points that you must observe in order to prevent product failure damage or malfunction and data loss p.4
- Handling caution p.4
- Handling p.4
- Connections p.4
- Battery use p.4
- Information for users on collection and disposal of old equipment and used batteries p.5
- Information p.5
- Bluetooth p.5
- Batteries p.5
- About content in this manual p.5
- Wireless communication functions u k and europe models p.5
- Wi fi 5 ghz p.5
- Wi fi 2 ghz p.5
- Maintenance p.5
- Introduction p.6
- Http download yamaha com p.6
- Http avpro global yamaha com manual avr rxa680 p.6
- Features p.6
- Av setup guide av setup guide is an app that guides you through the process of connecting a tv or playback device such as a bd dvd or cd player and speakers to the av receiver search av setup guide on the app store or google play for details p.6
- Preparations p.7
- Preparation p.7
- Confirming package contents preparing cables p.7
- When connecting 6 ohm speakers u s a and canada models only p.8
- Precautions for connecting speaker cables p.8
- Positioning speakers p.8
- Connecting speakers subwoofer p.8
- Tv bd dvd player satellite cable set top box p.10
- Hdmi output hdmi output p.10
- Hdmi input p.10
- Connecting external devices p.10
- Fm am antennas p.11
- Dab fm antenna p.11
- Connecting the radio antennas p.11
- Wireless network connection p.12
- Wired network connection p.12
- Preparing a network connection p.12
- Turn on the tv and switch the tv input to display video from the unit hdmi out jack p.13
- Press z receiver power to turn on the unit p.13
- Plug the power cable into an ac wall outlet p.13
- Connecting the power cable to an ac wall outlet and turning on the unit p.13
- Pop up menu p.14
- Optimizing the speaker settings automatically ypao p.14
- Yellow green p.14
- Volume volume p.14
- Volume program p.14
- Volume p.14
- Tuning tuning p.14
- Tuning p.14
- Program program p.14
- Program p.14
- Preset tuning p.14
- Preset preset p.14
- Preset p.14
- What is musiccast p.16
- Using musiccast controller p.16
- Setting musiccast p.16
- Adding the unit to the musiccast network p.16
- Basic playback functions p.18
- Playback p.18
- When straight straight decode is enabled each speaker produces each channel audio signal directly without sound field processing p.19
- When sound is not heard or no sound is output from a specific speaker see troubleshooting in the owner s manual p.19
- Press straight on the front panel to select fm100 am10 5 press z power to set the unit to standby mode and turn it on again p.19
- Playing a bd dvd p.19
- Listening to fm am radio p.19
- Input source device name p.19
- Fm 87 0mhz p.19
- Bd player p.19
- At the factory the frequency step setting is set to 50 khz for fm and 9 khz for am depending on your country or region set the frequency steps to 100 khz for fm and 10 khz for am 1 set the unit to standby mode 2 hold down straight on the front panel and press z power 3 press program on the front panel repeatedly to select tu p.19
- Press enter to start an initial scan p.20
- Press enter p.20
- Press dab to select the dab band p.20
- Listening to internet radio p.20
- Listening to dab radio p.20
- Bbc radio 4 p.20
- Use the cursor keys to select an item and press enter p.20
- Press tuning repeatedly to select a dab radio station p.20
- Press net repeatedly to select net radio as the input source p.20
- Select the unit network name of the unit from the available device list on the bluetooth device p.21
- Select a song and start playback on the bluetooth device p.21
- Scene function p.21
- Press bluetooth to select bluetooth as the input source p.21
- Playing music stored on a bluetoot p.21
- Device p.21
- Use the cursor keys to select a setting p.22
- Press usb to select usb as the input source p.22
- Press option p.22
- Playing music stored on a usb flash drive p.22
- Input select p.22
- Connect the usb flash drive to the usb jack p.22
- Basic operation of the option menu p.22
- Use the cursor keys to select an item and press enter p.22
- Use the cursor keys to select an item and press enter p.23
- Use the cursor keys to select a setting and press enter p.23
- Use the cursor keys to select a menu and press enter p.23
- Press setup p.23
- Basic operation of the setup menu p.23
- Troubleshooting p.24
- If trouble occurs first check the following make sure of the following when the unit does not function properly the power cables of the unit tv and playback devices such as bd dvd players are connected to ac wall outlets securely the unit subwoofer tv and playback devices such as bd dvd players are turned on the connectors of each cable are securely inserted in to jacks on each device if there is no problem with the power and cables refer to the instructions shown in the table below if the problem you are experiencing is not listed or if the instructions do not help turn off the unit disconnect the power cable and contact the nearest authorized yamaha dealer or service center p.24
- Specifications p.26
- Lisez attentivement avant de procéder à toute utilisation veillez à suivre ces instructions p.27
- Français p.27
- Entretien et maintenance p.27
- Démontage interdit p.27
- Avertissement relatif à la présence d eau p.27
- Avertissement p.27
- Alimentation cordon d alimentation p.27
- Utilisation des piles p.27
- Prévention contre les incendies p.27
- Précautions d usage p.27
- Perte de capacités auditives p.28
- Installation p.28
- En cas d anomalie p.28
- Ce contenu indique un risque de blessures p.28
- Attention p.28
- Appareil sans fil p.28
- Alimentation cordon d alimentation p.28
- Précautions d utilisation p.29
- Installation p.29
- Indique les points que vous devez respecter afin d éviter toute défaillance dommage ou dysfonctionnement du produit et toute perte de données p.29
- Entretien p.29
- Connexions p.29
- Alimentation cordon d alimentation p.29
- Utilisation des piles p.29
- À propos du contenu de ce manuel p.30
- Wi fi 5 ghz p.30
- Wi fi 2 4 ghz p.30
- Manipulation p.30
- Informations concernant la collecte et le traitement des piles usagées et des déchets d équipements électriques et électroniques p.30
- Informations p.30
- Fonctions de communication sans fil modèles pour le royaume uni et l europe p.30
- Entretien p.30
- Bluetooth p.30
- Introduction p.31
- Http download yamaha com p.31
- Http avpro global yamaha com manual avr rxa680 p.31
- Description p.31
- Av setup guide av setup guide est une application qui vous guide à travers le processus de connexion d un téléviseur ou d un appareil de lecture comme un lecteur bd dvd ou cd et des enceintes à l ampli tuner audio vidéo recherchez av setup guide sur l app store ou google play pour en savoir plus p.31
- Préparatifs p.32
- Vérification du contenu de l emballage préparation des câbles p.32
- Préparations p.32
- Raccordement des enceintes ou du caisson de graves p.33
- Précautions relatives au raccordement des câbles d enceinte p.33
- Positionnement des enceintes p.33
- Lors du raccordement d enceintes 6 ohms modèles pour les états unis et le canada uniquement p.33
- Téléviseur lecteur de disques bd dvd décodeur satellite câble p.35
- Sortie hdmi sortie hdmi p.35
- Raccordement des appareils externes p.35
- Entrée hdmi p.35
- Raccordement des antennes radio p.36
- Antennes fm am p.36
- Antennes dab fm p.36
- Préparation d une connexion réseau p.37
- Connexion réseau sans fil p.37
- Connexion réseau câblée p.37
- Raccordement du câble d alimentation à une prise secteur et mise sous tension de l appareil p.38
- Mettez le téléviseur sous tension et changez la source d entrée afin d afficher l image à partir de l appareil prise hdmi out p.38
- Branchez le câble d alimentation dans une prise secteur p.38
- Appuyez sur z alimentation de l ampli tuner pour mettre l appareil sous tension p.38
- Volume volume p.39
- Volume program p.39
- Volume p.39
- Tuning tuning p.39
- Tuning p.39
- Program program p.39
- Program p.39
- Preset tuning p.39
- Preset preset p.39
- Preset p.39
- Pop up menu p.39
- Optimisation automatique des réglages d enceintes ypao p.39
- Yellow green p.39
- Utilisation de musiccast controller p.41
- Réglage de musiccast p.41
- Qu est ce que musiccast p.41
- Ajout de l appareil au réseau musiccast p.41
- Lecture p.43
- Fonctions de lecture de base p.43
- Si vous n entendez pas de son ou si aucun son n est émis d une enceinte spécifique reportez vous à guide de dépannage dans le mode d emploi p.44
- Réglez les pas de fréquence sur 100 khz pour fm et 10 khz pour am en fonction de votre pays ou de votre région p.44
- Lorsque straight décodage direct est activé chaque enceinte produit directement le signal audio de sa propre voie sans traitement du champ sonore p.44
- Lecture d un disque bd dvd p.44
- Le réglage en usine des pas de fréquence est de 50 khz pour fm et 9 khz pour am p.44
- Fm 87 0mhz p.44
- Faites passer l appareil en mode veille 2 maintenez enfoncé straight sur la face avant et appuyez sur z alimentation 3 appuyez à plusieurs reprises sur program sur la face avant pour sélectionner tu p.44
- Bd player p.44
- Appuyez sur straight sur la face avant pour sélectionner fm100 am10 5 appuyez sur z alimentation pour faire basculer l appareil en mode veille et remettez le sous tension p.44
- Écoute d émission fm am p.44
- Source d entrée nom de l appareil p.44
- Écoute de la radio sur internet p.45
- Écoute de la radio dab p.45
- Utilisez les touches de curseur pour sélectionner un élément et appuyez sur enter p.45
- Press enter p.45
- Bbc radio 4 p.45
- Appuyez à plusieurs reprises sur tuning pour sélectionner une station de radio dab p.45
- Appuyez à plusieurs reprises sur net pour sélectionner net radio comme source d entrée p.45
- Appuyez sur enter pour procéder à l analyse initiale p.45
- Appuyez sur dab pour sélectionner la bande dab p.45
- Sélectionnez un morceau et démarrez la lecture sur l appareil bluetooth p.46
- Sélectionnez l unité nom du réseau de l unité dans la liste des appareils disponibles sur l appareil bluetooth p.46
- Lecture de musique stockée sur un dispositif bluetoot p.46
- Fonction scene p.46
- Appuyez sur bluetooth pour sélectionner bluetooth comme source d entrée p.46
- Utilisez les touches du curseur pour sélectionner un réglage p.47
- Utilisez les touches de curseur pour sélectionner un élément et appuyez sur enter p.47
- Lecture de musique stockée sur une clé usb à mémoire flash p.47
- Insérez la clé usb à mémoire flash dans la prise usb p.47
- Input select p.47
- Fonctionnement de base du menu option p.47
- Appuyez sur usb pour sélectionner usb comme source d entrée p.47
- Appuyez sur option p.47
- Utilisez les touches du curseur pour sélectionner un réglage et appuyez sur enter p.48
- Utilisez les touches du curseur pour sélectionner un menu et appuyez sur enter p.48
- Utilisez les touches de curseur pour sélectionner un élément et appuyez sur enter p.48
- Fonctionnement de base du menu réglages p.48
- Appuyez sur setup p.48
- Guide de dépannage p.49
- En cas de problème vérifiez d abord les points suivants assurez vous des points suivants lorsque l unité ne fonctionne pas correctement les câbles d alimentation de l unité du téléviseur et les appareils de lecture tels que les lecteurs bd dvd sont correctement connectés aux prises murales ca l unité le caisson de graves le téléviseur et les appareils de lecture tels que les lecteurs bd dvd sont allumés les connecteurs de chaque câble sont correctement insérés dans les prises de chaque appareil s il n y a aucune anomalie avec l alimentation et les câbles reportez vous aux instructions indiquées dans le tableau ci dessous si votre problème n est pas mentionné dans la liste ou si la solution proposée ne résout pas le problème mettez l appareil hors tension débranchez le câble d alimentation et contactez le revendeur ou le service après vente agréé yamaha le plus proche p.49
- Caractéristiques techniques p.51
- Precauciones p.52
- No desmonte la unidad p.52
- Mantenimiento y cuidado p.52
- Español p.52
- Antes de usar el producto asegúrese de leer detenidamente y seguir estas instrucciones p.52
- Alimentación cable de alimentación p.52
- Advertencia sobre el contacto con fuego p.52
- Advertencia sobre el agua p.52
- Advertencia p.52
- Uso de pilas p.53
- Unidad inalámbrica p.53
- Si observa cualquier anomalía p.53
- Instalación p.53
- Este contenido está relacionado con riesgo de lesiones p.53
- Atención p.53
- Alimentación cable de alimentación p.53
- Uso de pilas p.54
- Pérdida auditiva p.54
- Precauciones de uso p.54
- Mantenimiento p.54
- Instalación p.54
- Indica puntos que debe observar para evitar averías daños o mal funcionamiento del producto así como pérdidas de datos p.54
- Conexiones p.54
- Alimentación cable de alimentación p.54
- Wi fi 2 4 ghz p.55
- Mantenimiento p.55
- Manipulación p.55
- Información para usuarios sobre la recogida y eliminación de los equipos antiguos y las pilas usadas p.55
- Información p.55
- Funciones de comunicación inalámbrica modelos del reino unido y europa p.55
- Bluetooth p.55
- Acerca del contenido de este manual p.55
- Wi fi 5 ghz p.55
- Introducción p.56
- Http download yamaha com p.56
- Http avpro global yamaha com manual avr rxa680 p.56
- Características p.56
- Av setup guide av setup guide es una aplicación que le guía en el proceso de conectar un televisor o dispositivo de reproducción como un reproductor bd dvd o cd y altavoces al receptor av para más información busque av setup guide en app store o google play p.56
- Preparación p.57
- Comprobación de los contenidos del paquete preparación de los cables p.57
- Precauciones a la hora de conectar los cables de los altavoces p.58
- Posicionamiento de los altavoces p.58
- Cuando se conectan altavoces de 6 ohmios solo modelos de ee uu y canadá p.58
- Conexión de los altavoces altavoz de subgraves p.58
- Conexión de dispositivos externos p.60
- Conexión de antenas de radio p.61
- Antenas de fm am p.61
- Antena de dab fm p.61
- Preparar una conexión de red p.62
- Conexión de red inalámbrica p.62
- Conexión de red alámbrica p.62
- Pulse z alimentación del receptor para encender la unidad p.63
- Encienda el televisor y cambie la entrada de tv para que se muestre el vídeo de la unidad toma hdmi out p.63
- Conecte el cable de alimentación a una toma de ca p.63
- Conectar el cable de alimentación a una toma de ca y encender la unidad p.63
- Tuning tuning p.64
- Tuning p.64
- Program program p.64
- Program p.64
- Preset tuning p.64
- Preset preset p.64
- Preset p.64
- Pop up menu p.64
- Optimización de los ajustes de los altavoces automáticamente ypao p.64
- Yellow green p.64
- Volume volume p.64
- Volume program p.64
- Volume p.64
- Uso de musiccast controller p.66
- Qué es musiccast p.66
- Cómo añadir la unidad a la red musiccast p.66
- Configuración de musiccast p.66
- Reproducción p.68
- Funciones de reproducción básicas p.68
- Fuente de entrada nombre del dispositivo p.69
- Fm 87 0mhz p.69
- Escucha de radio fm am p.69
- En fábrica la configuración de los pasos de frecuencia se establece en 50 khz para fm y 9 khz para am según la región o el país donde escuche la radio establezca los pasos de frecuencia en 100 khz para fm y 10 khz para am 1 ponga la unidad en modo de espera 2 mantenga pulsado straight en el panel delantero y pulse z alimentación 3 pulse program en el panel delantero varias veces para seleccionar tu p.69
- Cuando está activado el modo straight decodificación directa cada altavoz produce directamente la señal de audio de cada canal sin procesamiento de campo sonoro p.69
- Bd player p.69
- Si no se oye el sonido o un determinado altavoz no emite sonido consulte resolución de problemas en el manual de instrucciones p.69
- Reproducción de bd dvd p.69
- Pulse straight en el panel delantero para seleccionar fm100 am10 5 pulse z alimentación para poner la unidad en modo de espera y vuelva a encenderla p.69
- Utilice las teclas del cursor para seleccionar un elemento y pulse enter p.70
- Pulse tuning varias veces para seleccionar una emisora de radio dab p.70
- Pulse net varias veces para seleccionar net radio como fuente de entrada p.70
- Pulse enter para empezar un escaneado inicial p.70
- Pulse dab para seleccionar la banda dab p.70
- Press enter p.70
- Escucha de radio por internet p.70
- Escucha de radio dab p.70
- Bbc radio 4 p.70
- Seleccione la unidad nombre de red de la unidad de la lista de dispositivos disponibles en el dispositivo bluetooth p.71
- Reproducción de música almacenada en un dispositivo bluetoot p.71
- Pulse bluetooth para seleccionar bluetooth como fuente de entrada p.71
- Función scene p.71
- Seleccione una canción e inicie la reproducción en el dispositivo bluetooth p.71
- Utilice las teclas del cursor para seleccionar un elemento y pulse enter p.72
- Utilice las teclas del cursor para seleccionar un ajuste p.72
- Reproducción de música almacenada en una unidad usb p.72
- Pulse usb para seleccionar usb como fuente de entrada p.72
- Pulse option p.72
- Input select p.72
- Funcionamiento básico del menú option p.72
- Conecte la unidad usb a la toma usb p.72
- Utilice las teclas del cursor para seleccionar un menú y pulse enter p.73
- Utilice las teclas del cursor para seleccionar un elemento y pulse enter p.73
- Utilice las teclas del cursor para seleccionar un ajuste y pulse enter p.73
- Pulse setup p.73
- Funcionamiento básico del menú setup p.73
- Si se produce un problema compruebe lo siguiente en primer lugar asegúrese de lo siguiente cuando la unidad no funcione correctamente los cables de alimentación de la unidad el tv y los dispositivos de reproducción como reproductores bd dvd están conectados con seguridad a tomas de ca la unidad el subwoofer el tv y los dispositivos de reproducción como reproductores bd dvd están encendidos los conectores de cada cable están insertados con seguridad en las tomas de cada dispositivo si el problema no se encuentra en la alimentación ni en los cables consulte las instrucciones mostradas en la siguiente tabla si el problema que tiene no aparece en la lista o si las instrucciones no le sirven de ayuda apague la unidad desenchufe el cable de alimentación y póngase en contacto con el centro de atención al cliente de yamaha o el distribuidor autorizado yamaha más cercano p.74
- Resolución de problemas p.74
- Especificaciones p.76
- Русский p.77
- Предупреждение p.77
- Перед использованием внимательно прочитайте данные указания следуйте этим инструкциям p.77
- Не разбирать p.77
- Меры предосторожности p.77
- Меры предосторож ности p.77
- Источник питания и кабель питания p.77
- Нештатные ситуации p.78
- Модуль беспроводной связи p.78
- Источник питания и кабель питания p.78
- Использование батареек p.78
- Данная информация предупреждает о риске получения травмы p.78
- Внимание p.78
- Беречь от огня p.78
- Беречь от воды p.78
- Обслуживание и уход p.78
- Установка p.79
- Техническое обслуживание p.79
- Потеря слуха p.79
- Меры безопасности при эксплуатации p.79
- Использование батареек p.79
- Установка p.80
- Указания которые необходимо соблюдать во избежание неисправности повреждения или нарушения работы изделия а также потери данных p.80
- Уведомление p.80
- Техническое обслуживание p.80
- Подключения p.80
- Обращение с аппаратом p.80
- О содержании этого руководства p.80
- Источник питания и кабель питания p.80
- Информация p.80
- Батарейки p.80
- Описание p.81
- Введение p.81
- Http download yamaha com p.81
- Http avpro global yamaha com manual avr rxa680 p.81
- Av setup guide av setup guide это приложение которое помогает выполнить процесс подключения телевизора или устройства воспроизведения например проигрывателя компакт дисков или bd dvd дисков и динамиков к ав приемнику для получения дополнительных сведений выполните поиск av setup guide на веб сайте app store или google play p.81
- Проверка комплектности подготовка кабелей p.82
- Подготовка p.82
- Расположение колонок p.83
- При подключении колонок с импедансом 6 ом только модели для сша и канады p.83
- Подключение колонок и сабвуфера p.83
- Меры предосторожности при подключении кабелей колонок p.83
- Подключение внешних устройств p.85
- Подключение радиоантенн p.86
- Антенны fm am p.86
- Антенна dab fm p.86
- Беспроводное сетевое подключение p.87
- Проводное сетевое подключение p.87
- Подготовка сетевого подключения p.87
- Подключите кабель питания к стенной розетке переменного тока p.88
- Подключение кабеля питания к стенной розетке переменного тока и включение аппарата p.88
- Нажмите кнопку z питание приемника чтобы включить аппарат p.88
- Включите телевизор и выберите источник входа телевизора для вывода видеосигнала с аппарата гнездо hdmi out p.88
- Автоматическая оптимизация настроек колонок ypao p.89
- Что такое musiccast p.91
- Настройка musiccast p.91
- Использование musiccast controller p.91
- Добавление аппарата к сети musiccast p.91
- Основные функции воспроизведения p.93
- Выбор источника входного сигнала p.93
- Воспроизведение p.93
- Включение выключение переход в режим ожидания аппарата p.93
- В этом разделе описывается основные операции такие как воспроизведение дисков blu ray dvd дисков и настройка на радиостанции большинство операций можно выполнить с помощью пульта ду p.93
- Регулировка громкости p.93
- Отключение выводимого звука p.93
- Прослушивание fm am радио p.94
- Нажмите кнопку straight на передней панели чтобы выбрать fm100 am10 5 нажмите z питание чтобы перевести аппарат в режим ожидания а затем включите его снова p.94
- Когда включен режим straight прямое декодирование каждая колонка воспроизводит аудиосигнал каждого канала напрямую без обработки звукового поля p.94
- Источник входного сигнала название устройства p.94
- Заводскими установками для шага частоты являются значе ния в 50 кгц для fm и 9 кгц для am в зависимости от страны или региона можно установить шаг настройки частоты 100 кгц для fm и 10 кгц для am 1 переведите аппарат в режим ожидания 2 удерживайте straight на передней панели и нажмите z питание 3 несколько раз нажмите кнопку program на передней панели чтобы выбрать tu p.94
- Если звук не слышен или не выводится через определенную колонку см устранение неисправностей в документе руководство пользова теля p.94
- Воспроизведение bd dvd диска p.94
- Straight p.94
- Fm 87 0mhz p.94
- Bd player p.94
- Интернет радиостанции можно также выбрать с помощью приложения musiccast controller установленного на мобильном устройстве p.95
- В зависимости от используемой услуги потоковой передачи может потребоваться следующее p.95
- Press enter p.95
- Bbc radio 4 p.95
- Прослушивание интернет радио p.95
- Прослушивание dab радио p.95
- Приложение musiccast controller установленное на вашем мобильном устройстве можно использовать для получения услуг потоковой передачи 1 выберите услугу потоковой передачи на экране приложения musiccast controller 2 выберите станцию p.95
- Несколько раз нажмите кнопку net чтобы выбрать net radio в качестве источника входного сигнала p.95
- Нажмите enter чтобы начать начальное сканирование p.95
- Нажмите dab чтобы выбрать диапазон dab p.95
- Нажимайте tuning для выбора нужной dab радиостанции p.95
- Функция scene p.96
- Нажмите bluetooth чтобы выбрать в качестве источника входного сигнала bluetooth p.96
- На устройстве bluetooth выберите песню и начните воспроизведение p.96
- На устройстве bluetooth в списке доступных устройств выберите аппарат сетевое имя аппарата p.96
- Воспроизведение музыки сохраненной на устройстве bluetoot p.96
- Straight p.96
- Bd dvd p.96
- Воспроизведение музыки сохраненной на флэш накопителе usb p.97
- Input select p.97
- Подключите флэш накопитель usb к гнезду usb p.97
- Основные операции меню опция p.97
- Нажмите клавишу option p.97
- Нажмите usb чтобы выбрать в качестве источника входного сигнала usb p.97
- Кнопками курсора выберите нужный элемент и нажмите enter p.97
- Выберите настройку с помощью клавиш курсора p.97
- С помощью клавиш курсора выберите настройку и нажмите enter p.98
- С помощью клавиш курсора выберите меню и нажмите enter p.98
- Основные операции меню настройка p.98
- Нажмите клавишу setup p.98
- Кнопками курсора выберите нужный элемент и нажмите enter p.98
- При возникновении проблемы сначала проверьте следующее если аппарат функционирует неправильно проверьте следующее кабели питания аппарата телевизора и воспроизводящих устройств таких как bd dvd проигрыватели надежно подключены к настенным розеткам переменного тока аппарат сабвуфер телевизор и воспроизводящие устройства такие как bd dvd проигрыватели включены штекеры каждого кабеля надежно вставлены в гнезда каждого устройства при отсутствии проблем с питанием и кабелями см инструкции приведенные в таблице ниже если неисправность не указана в таблице или инструкции не помогли выключите аппарат отсоедините кабель питания и обратитесь к ближайшему авторизованному дилеру или в сервисный центр yamaha p.99
- Поиск и устранение неисправностей p.99
- Возможная неисправность возможная причина метод устранения p.99
- Возможная неисправность возможная причина метод устранения p.100
- Bluetooth p.101
- Тюнер p.101
- Технические характеристики p.101
- Сеть p.101
- Общие характеристики p.101
- В содержании данного руководства приведены последние на момент публикации технические характеристики см руководство пользователя на веб сайте yamaha для проверки технических характеристик отличных от описанных выше и получения последней информации об аппарате p.101
- Remarque importante informations de garantie pour les clients de l eee et la suisse p.103
- Important notice guarantee information for customers in eea and switzerland p.103
- Http europe yamaha com warranty p.103
- Aviso importante información sobre la garantía para los clientes del eee y suiza p.103
- Zz79180 p.104
Похожие устройства
-
Yamaha RX-A8AРуководство пользователя -
Yamaha RX-A8AКраткое руководство -
Yamaha RX-A6AРуководство пользователя -
Yamaha RX-A6AКраткое руководство -
Yamaha RX-A4AРуководство пользователя -
Yamaha RX-A4AКраткое руководство -
Yamaha RX-A2AРуководство пользователя -
Yamaha RX-A2AКраткое руководство -
Yamaha HTR-2071Краткое руководство по началу работы -
Yamaha HTR-2071Инструкция по эксплуатации -
Yamaha HTR-4072Инструкция по эксплуатации -
Yamaha HTR-5072Инструкция по эксплуатации
Learn essential safety precautions for using electronic devices and batteries. Avoid risks of injury, electric shocks, and ensure proper handling and maintenance.