Hytera Z1p [11/18] Enabling disabling covert mode
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hytera Z1p [11/18] Enabling disabling covert mode

Hytera Z1p [11/18] Enabling disabling covert mode
7
Func menu by pressing the Func/OK key, and go to
“PhoneBook” menu; then press
Func/OK to enter
“Memory”.
Using BT Device
As soon as the product gets successful connection
to the BT device, the audio signal will be transmitted
via the BT device instead of the microphone and
speaker of the product.
Caution:
●
To derive the optimum audio quality,
you should use BT devices specified by
The Company: wireless headset, wireless
remote speaker microphone and wireless
finger PTT. For the details, please refer to
Chapter 12. Refer to the corresponding
manual for the detailed operations of the
BT devices.
●
If used with other company’s BT
earpiece, the product must connect to
the wireless finger PTT specified by the
Company. Otherwise, the audio will not
be transmitted via the BT earpiece.
Do place the product in the way described below;
otherwise, the audio quality will be lowered.
●
When wearing the product, be sure to wear it on
the same side with the BT devices and its LCD
display faces outwards.
●
If the product is not with you, be sure that the
distance between it and the BT device is within
10 meters and its LCD display faces the BT
device.
You are recommend
ed to connect the product to the
BT device in the ways below:
Initial Connection
Step 1 Enable the BT feature: press the shortcut
key; or go to “Func -> Others -> BT ->
Switch”. The icon
will appear in the
status bar with the feature enabled.
Note: The BT PTT and the earpiece are to be
connected in the same way separately. Here
we take how to connect the BT PTT as an
example.
Step 2 Turn on the BT device and set it in connection
mode. Please refer to the corresponding
manual for detailed operations.
Step 3 Search for the PTT: go to “Func -> Others
-> BT -> Match -> PTT Search”, the product
will search for the BT PTT.
Step 4 Sel ect “S top” wh e n t he pro duct has
searched the PTT.
Step 5 Connect to the BT PTT: go to “Options
-> Connect”. After getting connected, the
pr
oduct LCD display goes from “Connecting
…” to connected interface with the in
the status bar.
Non-initial Connection
I f a B T d e v i c e i s u p t o t h e t w o c o n d i t i o n s:
once connected to and reserved in the Device
L i s t ( un d e r t h e m e nu Fu n c - > O th e rs -> BT
-> M a tch), i t is rea d y for connect i on. You c a n
select the BT device from t h e D e v i c e List and
try connecting. If the connecting is failed, please
do the operations stated in Initial C onnection.
Moreover, if the product powers off without the BT
fe
ature disabled, the BT feature will be enabled
automatically upon the product power-on next time.
And if the once connected BT device is powered on,
it will automatically connect to the product.
Note: The Device List will be updated as
long as you perform “PTT Search” or “EP
Search”.
Enabling/Disabling Covert Mode
The covert mode is applied to conceal the product
from being discovered. When the product is in covert
mode, there will be no audible or visible indication,
such as no indicators or no LCD backlight, and the
terminal will enter silent mode or vibration mode
(which is preset by the dealer).
Note: If the product in covert mode has
been connected to an audio accessory, the
audio signal can only be transmitted via the
audio accessory.
●
Enable the covert mode: press the
shortcut key, or go to “ Func -> Settings
-> CovertMode”.
●
Disable the covert mode: first press Func/
OK key and then press
.

Содержание

Похожие устройства

Скачать