Linksys WUSB54GSC [13/38] Configuration
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Linksys WUSB54GSC [13/38] Configuration

Linksys WUSB54GSC [13/38] Configuration
Chapter 3
Configuration
10
Compact Wireless-G USB Network Adapter with SpeedBooster
Ad-Hoc Mode Settings
Channel – Select the correct channel for your
wireless network. If you are unsure about which
channel to use, keep the default, Auto.
Network Mode – Select the network mode in
which your wireless network will operate. In Mixed
Mode, Wireless-B and Wireless-G devices can both
operate on the network, though at a slower speed.
In G-Only Mode, no Wireless-B devices can operate
in the network.
Click Next to continue, or click Back to return to the
previous screen.
If your wireless network does not have wireless security, 5.
select Disabled and then click Next to continue.
Proceed to step 6.
Wireless Security
If your wireless network has wireless security, select
the method of security used: WEP, WPA Personal,
WPA2 Personal, WPA Enterprise, WPA2 Enterprise, or
RADIUS. WEP stands for Wired Equivalent Privacy, and
WPA stands for Wi-Fi Protected Access. WPA2 stands
for Wi-Fi Protected Access 2. WPA is a stronger security
method than WEP. WPA2 is a stronger security method
than WPA. RADIUS stands for Remote Authentication
Dial-In User Service. Click Next to continue, or click
Back to return to the previous screen.
Proceed to the section for your security method.
WEP
Make sure the settings you configure match the settings
of your wireless network.
WEP
WEP Select 64-bit or 128-bit encryption.
Passphrase Enter the network’s Passphrase, so a WEP
key is automatically generated. It is case-sensitive and
should not be longer than 16 alphanumeric characters.
This passphrase must match the passphrase of your other
wireless network devices and is compatible with Linksys
wireless products only. (If you have any non-Linksys
wireless products, enter the WEP key manually on those
products.)
WEP Key If you do not have the Passphrase, enter the
WEP key of your wireless network. For 64-bit encryption,
enter exactly 10 hexadecimal characters. For 128-bit
encryption, enter exactly 26 hexadecimal characters. Valid
hexadecimal characters are “0” to “9” and “A” to “F”.
Advanced Users
TX Key The default is 1. If your network’s wireless router
or access point uses transmit key number 2, 3, or 4, select
the appropriate number.
Authentication The default is Open System. For Open
System authentication, the sender and the recipient do
not share a WEP key for authentication. For Shared Key
authentication, both the sender and the recipient share a
WEP key for authentication.
Click Next to continue, or click Back to return to the
previous screen.

Содержание

Похожие устройства

Скачать