Home
Главная
Vitek
Радиочасы
VT-3504
Инструкция по эксплуатации Страница: 5

Vitek VT-3504 [5/24] English

ENGLISH

Set the DIMMER to the AUTO OFF position. In this

case when the alarm is activated, the display will

switch on as well.

Alarm snooze

Alarm signal will be continued during 30 minutes if

you do not press any buttons.

You can switch off the alarm signal for 9 minutes by

pressing of the SNOOZE button. In 9 minutes the

alarm signal will be repeated.

To switch off alarm snooze function, press the

button, if radio is selected as alarm signal, it will

switch off automatically in 30 minutes.

Set the DIMMER to the AUTO OFF position. During

switching on the display, press the SNOOZE/SLEEP

button to switch on the alarm snooze function, the

alarm signal and the display will switch on.

Auto switching off the radio

You can set the time for the radio to switch off. In the

radio mode press the SNOOZE/SLEEP button, “90”

will appear on the display, and the radio will switch

off automatically in 90 minutes. To reduce the time,

press the SNOOZE/SLEEP button, symbols 60-30-

15 will be displayed. In the present time the radio will

switch off. If you want to switch off the radio before

the preset time, press the

button.

Switching off the display lighting

When the radio is switched off, set the DIMMER

switch to the AUTO OFF position and in 15 seconds

the display lighting will switch off automatically.

Press any button to switch it on.

RESET button

Use a ball-point pen to press the RESET button

when replacing the battery or if the unit malfunc-

tions, the settings will return to the default ones, all

the stored data (current time and alarms settings)

will be lost.

Image projection

To project time, turn the projector in the necessary

direction. Switch on the projector, by pressing the

PROJECTION ON/OFF button.

To focus the projected image, rotate the FOCUS

control. To turn the projected image to 180° press

the 180° FLIP button.

Press the PROJECTION ON/OFF button to switch

off the projector.

Note: The unit projects the image on the ceiling or

the wall of the darkened room. Maximal distance is

90 – 270 cm.

Connecting the external device

To connect the external device use the LINE IN jack

Connect the external device using the 3,5 mm Jack

audio cable (not supplied with the unit).

Press the

button to listen to the sound from the

external device. Use the VOLUME control to set the

desired volume level.

Note: Electromagnetic interferences can influence

operation of the unit. In this case disconnect the unit

from the power sources, and then connect again. If

necessary change the location of the unit.

Clean and care

Unplug the unit before cleaning. Use a soft cloth

to clean the unit. Do not use liquid or aerosol sub-

stances for cleaning.

Technical specifications

Power supply: 240 V AC, 50 Hz;

Reserve power supply: Battery 3V CR2032

Power consumption: < 5W

Clock accuracy movement: ± 1с

Frequency range:

AM: 530 – 1600 kHz

FM: 88 – 108 MHz

Temperature range: from 0° till 50°С (from 32° till 122°

The manufacturer reserves the right to make

changes to the characteristics of the device without

prior notice.

Service life of appliance - 3 years

Guarantee

Details regarding guarantee conditions can be ob-

tained from the dealer from whom the appliance

was purchased. The bill of sale or receipt must be

produced when making any claim under the terms

of this guarantee.

This product conforms to the EMC-Re-

quirements as laid down by the Council

Directive 89/336/EEC and to the Low

Voltage Regulation (23/73 EEC)

3504IM.indd 53504IM.indd 5 21.05.2010 16:20:2321.05.2010 16:20:23

Vitek VT-3504 [5/24] English

Содержание

Похожие устройства