Dometic Coolair SP950I [15/316] Switching on the parking cooler

CoolAir SP950 Using the parking cooler

7.2 Switching on the parking cooler

➤ With the system switched off, press the button.

✓ The fan starts at low speed.

✓ The Power LED (fig. 2 8, page 3) lights up.

✓ The digital display (fig. 2 5, page 3) shows the target temperature in °C and the

operating mode (e.g.

A20 for automatic mode + temperature 20 °C).

7.3 Selecting the temperature

You can select temperatures between 17 °C and 30 °C.

➤ Press + or – on the control panel or + or – on the remote control to set the

temperature in 1 °C increments.

✓ The digital display (fig. 2 5, page 3) shows the operating mode and the

selected temperature in °C.

NOTICE!

Never close all of the air nozzles of the parking cooler simultaneously.

The device would ice up inside.

NOTE

The first time the parking cooler is used, there may be a slight smell. This

is normal and soon goes away.

NOTE

If you completely switch off the parking cooler, it can only be switched

on again using the control panel. The system can only be switched on

using the remote control if it is in standby mode. If the system is not

going to be used for a lengthy period, switch it off completely so that the

battery is not wasted supplying standby power.

NOTE

The compressor is switched on after a delay of approx. 90 seconds.

NOTE

If mode I or II fails to achieve the selected temperature, switch to the

next mode up or to automatic mode.

SP950-O-16s.book Seite 15 Freitag, 24. Februar 2017 4:26 16