SAWO Dragonfire DRF3-90NS [17/20] Caution

CAUTION!

Always check the sauna room before switching sauna heater on (to be sure that

there is no combustible things within the safety distances of the heater or on the

heater). Make sure that sauna room has been efficiently ventilated. If the output

of the heater is proper it will take about an hour to reach suitable temperature

(Fig. 5). The temperature in sauna room should be between +60 - + 90 °C,

according to the preference of user. Too powerful heater will heat sauna room

too quickly and the stones won't have enough time to warm. The water poured

on the stones will not evaporate, but flow into the stone holder. An underpow-

ered heater, on the other hand, would lead to an undesirably long heating

period.

Smoke and odor formation when heating up for the first timeWork materials

from the manufacturing process will be present on the new heating elements.

These evaporate when the sauna heater is heated up for the first time. This

produces smoke and an unpleasant odor. Breathing in the fumes or smoke

can be harmful to your health.

Perform the following steps when operating the sauna heater for the first time

and if the heating elements for the sauna heater have been changed. In this

way y

ou will prevent damage to health due to the fumes and smoke produced

when heating up for the first time.

1. Select the highest possible temperature in the sauna control.

2. Heat up the sauna heater for half an hour. Do NOT stay in the sauna

3. Allow the sauna cabin to ventilate thoroughly after heating up for the first

time.

4. If no smoke or odor is produced the next time the sauna heater is heated up,

you can start to use the sauna. If smoke or odor is produced again, leave the

sauna cabin immediately and repeat the initial heating up process followed by

ventilation.

Heating of the sauna

ENGLISH