Kuppersberg HO 658 T [10/27] Regular inspections
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg HO 658 T [10/27] Regular inspections

Kuppersberg HO 658 T [10/27] Regular inspections
18 19
TECHNICAL PASSPORT ENGLISH ENGLISH TECHNICAL PASSPORT
Electric oven Electric oven
3. Pull the inner glass panel from its
seat (in the lower section of the door).
Re move the inner panel (fi g. D).
4. Clean the panel with warm water
with some cleaning agent added.
Carry out the same in reverse order
to reassemble the inner glass panel. Its
smooth surface shall be pointed up-
wards.
Important!
Do not force the upper strip in on
both sides of the door at the same time.
In order to correctly fi t the top door
strip, fi rst put the left end of the strip on
the door and then press the right end in
until you hear a “click”. Then press the
left end in until you hear a “click”.
Removal of the internal glass panel.
3 glass.
Removal of the internal glass panel
2 glass.
Replacement of the oven light bulb
In order to avoid the possibility of an
electric shock ensure that the appliance
is switched off before replacing the
bulb.
Set all control knobs to the
position “”/“0” and disconnect the
mains plug,
unscrew and wash the lamp
cover and then wipe it dry.
unscrew the light bulb from the
socket, replace the bulb with a new one
– a high temperature bulb (300°C)
with the follow ing parameters:
- voltage 230 V
- power 25 W
- thread E14.
Oven light bulb
Screw the bulb in, making sure
it is prop erly inserted into the ceramic
socket.
Screw in the lamp cover.
Regular inspections
Besides keeping the oven clean, you
should:
carry out periodic inspections of
the con trol elements and cooking units
of the cooker. After the guarantee has
expired you should have a technical
inspection of the cooker carried out at
a service centre at least once every two
years,
fi x any operational faults,
carry out periodical maintenance
of the cooking units of the oven.
Caution!
All repairs and regulatory activities
should be carried out by the ap propriate
service centre or by an appropriately
authorised fi tter.
OPERATION IN CASE OF EMERGENCY
In the event of an emergency, you should:
switch off all working units of the oven
disconnect the mains plug
call the service centre
some minor faults can be fi xed by referring to the instructions given in the
table below. Before calling the customer support centre or the service centre check
the following points that are presented in the table.
PROBLEM REASON ACTION
1. The appliance does not work. Break in power supply.
Check the household fuse box; if
there is a blown fuse replace it
with a new one.
2. The programmer display
shows “0:00”.
The appliance was discon nected
from the mains or there was a
temporary power cut.
Set the current time
(see ‘Use of the programmer’).
3. The oven lighting does not
work.
The bulb is loose or damaged.
Tighten up or replace the
blown bulb (see ‘Cleaning and
Maintenance’).

Содержание

Похожие устройства

Скачать