Kuppersberg WIS 60129 [8/48] Adjust the machine horizontally

TECHNICAL PASSPORT ENGLISH

Washing Machines

INSTALL WASHING

MACHINE

 Remove transit bolts Before using

this washing machine, transit bolts

must be removed from the backside of

this machine. Please take the following

steps to remove the bolts:

1. Loosen the four transit bolts with a

spanner

2. Take each bolt head and pull it

through the wide part of the hole.

Repeat for each bolt.

3. Fill the holes with the supplied

plastic covers.

4. Keep the transit bolts properly for

futher use.

Adjust the machine horizontally

There will be strong shock, noise, and

disfunction In operation if the washing

machine is not steadily installed. Please

adjust the front adjustable Leg. Methods

are as follows:

1. Check whether the washer is on a

level surface using a plumb line as

shown in the Beside ﬁ gure.

 The washer is on level ground

ﬂ oor if the Frame line of washer is

parallel with the plumb line.

2. Adjust the Adjustable Leg of washer

if necessary to make the washer

level as shown in the Beside ﬁ gure.

3. Put your hands on the washer

diagonally, press and shake the

washer slightly to make sure that

the washer is steady.