IKA T 25 easy clean control 0025002500 [5/17] Intended use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

IKA T 25 easy clean control 0025002500 [5/17] Intended use

IKA T 25 easy clean control 0025002500 [5/17] Intended use
5
Use:
When used in combination with one of our recommended
dispersion tools, the drive unit is a high-speed dispersing
and emulsifying unit capable of handling free-flowing and
liquid media in batches.
Production of:
Emulsions
Dispersions
Wet crushing
Intended use: on stand (dispersion tool points down)
Range of use (indoor use only):
- Laboratories - Schools
- Pharmacies - Universities
The device is suitable for use in all areas (EMC class A and B).
The safety of the user cannot be guaranteed:
- If the device is operated with accessories that are not sup-
plied or recommended by the manufacturer
- If the device is operated improperly or contrary to the
manufacturer’s specifications
- If the device or the printed circuit board are modified by
third parties.
Intended use
Accessories:
• Protect the device and accessories from bumps and im-
pacts.
• Check the device and accessories beforehand for damage
each time you use them. Do not use damaged components.
• Only dispersion tool approved by IKA may be used.
• Safe operation is only guaranteed with the accessories de-
scribed in the ”Accessories” chapter.
Disposal of the device:
• The device must be disposed of in accordance with national
regulations
Covers or parts that can be removed
from the device without tools must
later be refitted to ensure safe op-
eration. This will prevent the infiltration of foreign objects,
liquids and other contaminants.
Never run dispersion tools dry, as the gasket and bear-
ings will be destroyed if the tools are not cooled by the
medium.
• In the event of unbalance or unusual noises, switch off
the device immediately. Replace the dispersion tool. If
there is no difference after the change of the dispersion
tool, return it to the dealer or the manufacturer along
with a description of the fault.
• Ensure that the stand does not start to move.
• Meter powder cannot be placed too close to the flange.
Powder can be blown away by air turbulences of the drive.
• There may be electrostatic discharges between the me-
dium and the dispersing device shaft which could pose a
direct danger.
NOTICE
Power supply / Switching off the device:
• The device can only be disconnected from the power sup-
ply by pulling out the power plug or the connector plug.
• Always disconnect the plug before fitting accessories or
cleaning.
• The socket for the power cord must be easily accessible.
• The device does not start up again automatically follow-
ing a cut in the power supply.
• The device must only be opened by trained specialists,
even during repair. The device must be unplugged from
the power supply before opening. Live parts inside the
device may still be live for some time after unplugging
from the power supply.

Содержание

Похожие устройства

Скачать