Devilbiss FLG-S5-18 — спрей-ган с всасывающим подачей для высококачественной отделки [2/8]

Превью страниц Страница 2 / 8

Important

Read and follow all instructions and Safety Precautions before using this

equipment

Description

The FLG5 Suction-feed Spray gun is fitted with a 1.8mm nozzle for topcoat applications.

The FLG5 Spray gun is approved to ATEX regulations 94/9/EC, protection level;

II 2 G X. Suitable for use in Zones 1 and 2

Important: These spray guns are suitable for use with both water-based and solvent-based

coating materials. The design uses EPA compliant atomising (Devilbiss Trans-Tech®)

technology to reduce overspray and improve coating efficiency. Nozzles and needles are

manufactured in stainless steel. These guns are not designed for use with highly corrosive

and/or abrasive materials and if used with such materials it must be expected that the need for

cleaning and/or replacement of parts will be increased. If there is any doubt regarding the

suitability of a specific material contact your local Distributor or Finishing Brands UK Limited

direct.

Specification

Air supply connection - Universal ¼” BSP and NPS

Maximum static air inlet pressure - P

= 12 bar (175 psi)

Nominal gun inlet pressure with gun triggered - 2.4 bar (35 psi)

Maximum service temperature - 40°C

Gun weight - 930 g

Air flow - 277 l/min (9.8 cfm)

Materials of Construction

Gun body - Aluminium

Nozzle - Stainless steel

Needle - Stainless steel

Cup - Aluminium and steel

Finishing Brands UK Limited reserves the right to modify equipment specification without prior notice.