Zanussi ZBB7297 Инструкция по эксплуатации онлайн [26/32] 50209

D724

Apply the sealing strip pushing it between the

refrigerator and the adjacent cabinet.

Fasten the appliance with 4 screws provided in the

kit included with the appliance.

(I = short) (P = long)

Make sure that a distance of 44 mm is maintained in

the lower part between the kitchen furniture and the

border of the appliance.

The lower hinge cover inserted in the accessories

bag, is useful to guarantee the exact position of the

kitchen furniture and the appliance.

Also make sure that the appliance does not clamp

the mains cable

44mm

Apply covers (C-D) on joint cover lugs and into hinge

holes.

Snap vent grille (B) and hinge covers (E) into

position.

From the plastic cover (E), which is used to cover the

hinge with the pivot pin, you must take away the part

as indicated in the drawing.

This operation is made easer since there is, in the

internal part of the cover hinge lid a groove that

facilates the removal of this coomponent.

“Remove the part marked with DX, if the pivot pin is

inserted in the right hinge, SX in opposite case.”