Zanussi ZBB7297 Инструкция по эксплуатации онлайн [28/32] 50209

D734

If the appliance is to be fitted laterally to the kitchen

unit, it will be sufficient to loosen the screws of the

little plates (D), move them as shown in Fig. and

then fasten them up again. Fit the cover (E).

After having reversed the opening direction of

the doors check that all the screws are properly

tightened and that the magnetic seal adheres to

the cabinet. If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natural

fitting of the gasket or accelerate this process by

heating up the part involved with a normal

hairdrier.

PR167/1

Fix cover (Hd) on guide (Hb) until it clips into place.

PR168

Place the small square on the guide again and fix it

with the screws supplied.

Should the lining up of the furniture door be

necessary, use the clearance of slots.

At the end of operations, it is necessary to check if

the door of the furniture closes properly.