Tascam IF-E100 [6/14] Connecting to the if e100
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Tascam IF-E100 [6/14] Connecting to the if e100

Tascam IF-E100 [6/14] Connecting to the if e100
6
TASCAM CD-400U Network Settings
Connecting to the IF-E100
Connection with the IF-E100 is necessary to change its network
settings using CD-400U Network Settings.
1. Connect the IF-E100 and the computer that has CD-400U
Network Settings installed on the same network.
NOTE
i This application can only set one unit. If multiple IF-E100 cards
are connected on the same network, turn the power on only
for the CD-400U with the IF-E100 that you want to set. Turn off
the other CD-400U units.
i If the computer that you are using has multiple network in-
terfaces, disable the interfaces that are not being used to con-
nect to the IF-E100 (CD-400U).
i This software can be used even if the IP address is not set on
the IF-E100 (CD-400U). (see “Disabling network interfaces that
will not be used” on page 7)
2. Turn the power on for the CD-400U unit with the IF-E100 in-
stalled.
3. Click the TASCAM CD-400U Network Settings icon to launch
the application.
An IF-E100 to be set has not been found, so “IP Address” and
other fields will be blank.
4. Click the Search button to search for an IF-E100 on the net-
work.
“Working…” appears while searching.
5. The IP Address, Subnet Mask, Gateway, DNS, MAC address
and Telnet Password settings are shown.
The IF-E100 to be set has been found and can now be set.
NOTE
Is one of the following message appears, the IF-E100 has not
been found properly. Check the set up, make necessary ad-
justments and click Search again to search for the IF-E100.
Message Meaning
Device not found
An IF-E100 could not be found on the
network. Confirm that the CD-400U
power is on and that it is connected
correctly.
No valid active
connections
No valid network could be found. The
computer that you are using might
not be properly connected to the
network.
Multiple devices
found
Multiple IF-E100 cards were found.
CD-400U Network Settings cannot
connect to multiple units at the same
time. Turn the power off for the other
CD-400U units with IF-E100 cards
installed that you do not want to set
now.

Содержание

Похожие устройства

Скачать