Ecowater eVOLUTION 100 Compact Инструкция по использованию контрольной панели онлайн [4/9] 451640

1.3. R

ADIO COMMUNICATIONS BETWEEN INITIATED SOFTENER AND REMOTE

MONITOR

1) Start softener ESM according to the instructions attached to it.

2) Make sure the portable monitor is running.

3) When initiating the radio communication between softener and a portable monitor, keep

the monitor near water softener.

4) In softener press SELECT (c) from level of changing basic information on the

screen one after the other, to enter the "Main Menu". Then press DOWN button (b),

until you see "Advanced Settings", which should be in the frame. Press SELECT

(c). Then press DOWN button (b), until "Connect to a portable panel" will be in the

frame.

5) Before the softener will be "added" to the portable monitor laptop screen monitor

display is a window menu, as shown in Fig. below. If you do not see the menu

window, first in a portable monitor, press SELECT(c).

6) If the window Menu is visible, the word "Select language" should be in

frame. Then press SELECT (c). DOWN buttons (b

) or UP (a) should

find your

language and then select it by pressing SELECT (c).

7) Then, in portable monitor press DOWN

(b), until "Add new device" will be in the

frame. Then press SELECT(c). You will get message "Waiting for new device ... Turn

on t

he machine!".

8) In softener, make sure that the word "Connect to a portable panel" is in the frame.

9) In softener press SELECT (c). After few seconds you should see the message "Found

portable monitoring panel".

10) Portable monitor should show the message "Adding a device successful. Softener ESM ".