Ecowater eVOLUTION 300 Boost Инструкция по использованию контрольной панели онлайн [7/9] 451642

f Option „Automatic regeneration” deletes manually set time of regeneration and

allows electronic controller to define time of regeneration.

f Option „Immediate regeneration” starts

process of regeneration right after pressing

SELECT (c).

f Option „Planning regeneration” allows setting time of regeneration start.

7) Press SELECT (c).

8) Press LEFT (_).

3) Press SELECT to go to menu.

3)Press DOWN (b) until "Regeneration time” appears, which should be in frame.

4) Press SELECT (c).

5) Press DOWN (b) or UP (a), so that time changes 1 hour back or forward. If you

hold the button, time changes faster. If 12-hour time is set, you should check whether

there is "AM" between 0

and 11

and "PM" between 12

and 23

6) Press SELECT (c).

7) Press LEFT (_).

8. CHANGE / CHOICE OF BASIC INFORMATION ON THE SCREEN

You can enable and disable the display of chosen information.

1) Press LEFT (_) or RIGHT (`) to

go to softener data.

2) Press SELECT (c) t

o go to menu.

3) Press DOWN (b) until „Selection of data to display” appears, which should be in

frame.

4) Press SELECT (c).

5) Press DOWN (b) or UP (a) to move on information list on the screen.

Information, next to which is a black square with a tag, will be displayed in

softener normal operation mode.

7. PROGRAMMING OF REGENERATION TIME

Factory hour softener regeneration is set for 2.00 am. To change this time, use a portable

monitor:

1) Press LEFT (_)

or RIGHT (`) to go to softener data

6) To select the information that is not selected, you must make sure that it is next to a

black square. Then press SELECT (c), then in a square marker appears.

7) If you do not w

ant certain information to be displayed on the screen (it was previously

selected), you should make sure that next to it is a black square with a tag, then press

SELECT(c) and then a square marker disappears.

8) After making your selection, press twice LEFT (_).