Fluke 787 Инструкция по эксплуатации онлайн [7/50] 5039

ProcessMeter

Safety Information

• Make sure the battery door is closed and

latched before you operate the meter.

• Remove test leads from the meter before

you open the battery door.

• Inspect the test leads for damaged

insulation or exposed metal. Check test

leads continuity. Replace damaged test

leads before you use the meter.

• Do not use the meter if it operates

abnormally. Protection may be impaired.

When in doubt, have the meter serviced.

• Do not operate the meter around

explosive gas, vapor, or dust.

• Use only a single 9V battery, properly

installed in the meter case, to power the

meter.

• When servicing the meter, use only

specified replacement parts.

Caution

To avoid possible damage to meter or to

equipment under test:

Disconnect the power and discharge all high-

voltage capacitors before testing resistance

or continuity.

Use the proper jacks, function, and range for

your measurement or sourcing application.

To protect yourself, adhere to the following guidelines:

• Use caution when working above 30V ac rms, 42V ac

pk, or 60V dc. Such voltages pose a shock hazard.

• When using the probes, keep your fingers behind the

finger guards on the probes.

• Connect the common test lead before you connect

the live test lead. When you disconnect test leads,

disconnect the live test lead first.