Viconte vc-3204 [4/12] Before use

Viconte vc-3204 [4/12] Before use
Place the appliance on a stable level and heat-resistant surface, away from hot objects (e.g. hotplates), open ames; do not place
under curtains or low wall-cupboards.
• You should never leave the appliance unattended during use.
• Keep the appliance away from children.
• Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.
• Never remove the kettle from its base unit while in operation. Switch the appliance off rst.
Take care to close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and hot water
may overow.
• The kettle is intended for water heating only, and is not to be used for any other liquids.
BEFORE USE
• Remove all packing material from the kettle.
• Before connecting of the kettle check that voltage indicated on the rating label corresponds the mains voltage in your home.
• Place the lter.
• Fill the kettle with cool water up to the “MAX” mark and boil it. Empty the kettle. The appliance is ready for use.
INSTRUCTION FOR USE
FILTER PLACING
• Open the lid by pressing on the lid open button.
• Place the lter between the two grooves near the spout at the front of the kettle.
• Ensure that the lter is pressed down to the bottom of the grooves and ts correctly then close the lid.
NOTE: Never leave the lter loose in the kettle. Never remove the lter while the kettle contains hot water.
FILLING
• Remove the kettle from the base unit.
• You can ll the kettle with water via the spout or opening the lid.
• Do not ll with less than 0.5 liters of water (below to “MIN” mark) to prevent the heating element running dry while operating.
Do not ll with more than 1.7 liters of water (up to “MAX” mark). Avoid overlling to prevent the water spilling out during the
boiling process.
Скачать