Sinbo SSI 6625 Инструкция по эксплуатации онлайн [4/15] 462613

- 3 -

INSTRUCTION FOR USE

Filling the Water Tank

• Ensure the appliance is unplugged from the mains power supply.

• Place the Steamer on a flat, stable surface.

• Carefully unscrew and remove the water tank cap.

• Fill the water tank with water using the supplied measuring cup.

• Fill the tank with cold water to the desired time level ensuring not to exceed the

maximum mark indicated in the water tank window.

Max-15-Steaming for 15 Minutes

10-Steaming for 10 Minutes

5- Steaming for 5 Minutes

• Replace the water tank cap ensuring it is thoroughly tightened.

CAUTION:

• After each use, always allow the unit to cool for 15 minutes before filling cold water

and shooting steam from the fill hole.

• Extreme caution is required when pouring water into the water tank.

• Never fill water to exceed the Max fill line.

NOTE:

• Use of distilled or demineralized water is recommended to prolong the life of the

steamer.

• Use water only; do not use detergents or other chemical substances.

• Misuse will lead to an invalid guarantee.

Steaming Linens and Fabrics

• Ensure the water tank has been filled and that the desired accessory is connected and

then follow the steps below:

• Plug the unit into the mains power supply and switch it on if switchable.

• Switch the unit on and the button will illuminate to indicate the appliance is on.

• Steam will emit from the nozzle after approximately 2 minutes.

• Direct the steam nozzle with either one of the accessories towards the materials you

wish to steam.

• Keep the flow of steam focused on the material being steamed.

Using a slight back and forth motion over the area you are steaming further enhances

the process.

CAUTION: Always be sure that the Steam Nozzle and any other attachments are pointed

in safe direction away from the user, other people and animals when steam is emitting.