Sinbo SSI 6625 Инструкция по эксплуатации онлайн [5/15] 462613

- 4 -

Steaming Garments

• Place the garment on a clean rust-free hanger.

• Direct the steam nozzle towards the bottom of the garment.

• Steam will rise on both the inside and the outside of the fabric removing the wrinkles

and creases. Slowly slide the steam nozzle upwards from the bottom to the top of the

garment.

• Direct the steam nozzle away from the garment and smooth the fabric with your free

hand.

• Repeat as necessary until the garment is crease-free.

STORAGE

• Unplug the power cord from the mains power supply.

• Allow the unit to cool thoroughly (at least 60 minutes).

• Remove all attachments from the unit.

• Drain the remaining water from the water tank to minimize potential mineral build-

up. Loosely replace the water tank cap but do not tighten as it may be difficult to unscrew

for future use.

• Store all accessories with the unit in a dry, cool location.

REMOVING MINERAL BUILD-UP

• Different water sources contain minerals and the sediment may cause mineral build-

up in the steamer and affect the free flow of steam.

• NOTE: The best way to avoid mineral build-up is to use distilled or demineralized

water. If you are unable to do this, it is recommended to use the mineral build-up

removal procedure.

• Unplug the unit and allow it to cool completely (at least 60 minutes).

• Remove all accessories from the unit.

• Remove the water tank cap and drain any remaining water from the water tank.

• Using a measuring cup, prepare a mixture of 0.125l. vinegar and 0.125l.water.

• Slowly pour the mixture into the water tank.

• Allow the unit to stand for 1-2 hours.

• Drain the solution from the water tank.

• If the mineral build-up still remains in the unit, repeat the above steps until all build-

up is removed.

• Rinse the water tank with fresh water, drain and repeat until the vinegar odor is

eradicated.

• Replace the water tank cap.