Sinbo SVC 3492 Инструкция по эксплуатации онлайн [5/15] 462619

- 4 -

SAFETY PRECAUTIONS

• Do not use the vacuum cleaner near hot surfaces, ashtrays and in places where

inflammable liquids are stored.

• Take sharp objects away from the floor before cleaning to prevent unit damage.

ASSEMBLING THE VACUUM CLEANER

After unit transportation or storage at low temperature keep it for at least three hours

at room temperature before switching on.

– Unpack the unit completely and remove any advertising stickers that can prevent the

unit operation.

– Check the unit for damages; do not use a damaged unit.

– Before switching the unit on, make sure that your home mains voltage corresponds

to the unit operating voltage.

Installing and removing the brush

– Install the brush in the setting place. To remove the turbo brush pull it downward.

Installing and removing the dustbag

– Before installing or removing the dustbag make sure that the vacuum cleaner is

switched off and the power plug is not inserted into the socket.

– To remove the dustbag pull the lock and remove the dustbag. To install the dustbag

back to its place match the ledge on the bottom part of the dustbag with the groove on

the vacuum cleaner body and insert the dustbag into the motor unit of the vacuum cleaner

until bumping.

– Before installing the dustbag back to its place make sure that the inlet filter and the

HEPA filter are installed properly into the dustbag.

ATTENTION! Do not use the vacuum cleaner, if the inlet filter and the HEPA filter are

not installed in the dustbag.

Installing and removing the handle

– Install the handle to the vacuum cleaner body until the locks situated on the front and

rear parts of the vacuum cleaner body click.

– To remove the handle press the locks simultaneously and pull the handle upwards.

USING THE VACUUM CLEANER

ATTENTION! You may switch the vacuum cleaner on only with the dustbag, the inlet filter

and the HEPA filter installed in the dustbag. Before switching the vacuum cleaner on

always make sure that the filters are installed properly in the dustbag.

– Before using the unit, unwind the power cord to its full length and insert the power

plug into the mains socket.

– To unwind the cord fast turn the upper hook clockwise or counterclockwise and remove