Sinbo SVC 3492 Инструкция по эксплуатации онлайн [6/15] 462619

- 5 -

the power cord.

Note: If necessary, you can adjust the power cord length winding the excessive cord

around the cord storage hooks.

– Press the ON/OFF button to switch the vacuum cleaner on.

– During the operation of the unit you can control the suction power by turning the control

knob.

– After room cleaning press the ON/OFF button, set the vacuum cleaner to the vertical

storage position and unplug it.

– To wind the power cord use the cord storage.

CLEANING THE VACUUM CLEANER

It is recommended to clean the vacuum cleaner after every use. Before cleaning the

vacuum cleaner, switch it off by pressing the ON/OFF button, set the vacuum cleaner to

the vertical storage position and unplug it.

Cleaning the dustbag, the inlet filter and the HEPA filter.

– To remove the dustbag pull the lock and remove the dustbag.

– Take the HEPA filter by both sides and remove it from the dustbag together with the

inlet filter.

– Remove dust and garbage from the inlet filter with a suitable brush.

– Take the HEPA filter by both sides and remove it from the inlet filter. Remove dust and

garbage from the HEPA filter with a suitable brush.

– Remove accumulated dust and garbage from the dustbag to a trash bin.

– Wash the inlet filter, the HEPA filter and the dustbag under a warm water jet and dry

them thoroughly.

– Install the HEPA filter into the inlet filter.

– Install the inlet filter with the installed HEPA filter into the dustbag.

– To install the dustbag back to its place match the ledge on the bottom part of the

dustbag with the groove on the vacuum cleaner body and insert the dustbag into the unit

body until bumping.

Cleaning of the brush

– Remove the brush from the brush setting place, clean the turbo brush and install it

back to its place.

– Clean the rotating brush as it becomes dirty.

– You can easily remove threads or long hair wound up around the brush by cutting them

with scissors preliminary; be careful not to damage the bristles of the brush.

Vacuum cleaner body

• Wipe the vacuum cleaner body with a soft, slightly damp cloth and then wipe it dry.

• Do not immerse the vacuum cleaner body, the power cord and the power plug of the

unit into water or other liquids. Provide that no liquid gets inside the vacuum cleaner

body.