MPM GreenGo 4.0 MOD-35 [14/36] Slot tool 22 for vacuuming corners spaces under furniture and other hard to reach

CHARGING THE BATTERY

CAUTION! Charge the battery before the ﬁrst use. Charging the battery takes about 3.5-4.5 hours.

CAUTION! Use only the supplied charger for charging the battery. It is not possible to turn on the vacuum clean-

er while charging the battery.

1. Install the battery (15) in the motor module (1), do not turn the vacuum cleaner on.

2. Plug the charger cable (26) to the power adapter input (27) and plug the charger into the

power outlet – the battery charge indicator will start ﬂashing (6a) – during the charging pro-

cess 1, 2 or 3 dots will be ﬂashing.

3. Full battery charge is signalled by three continuously lit dots on the display (6a), and the

display will turn oﬀ afterwards.

4. Unplug the charger from the power outlet and the charger cable from the vacuum cleaner.

OPERATING THE VACUUM CLEANER

1. Make sure that the vacuum cleaner has been assembled properly and the battery is charged.

2. Attach appropriate tools:

multi-purpose electric brush with lighting (20) – for all types of solid surfaces and carpets,

LED lighting illuminates the cleaned surface, ensuring perfect vacuuming

slide-out multi-purpose tool (24) – intended for vacuuming of blinds, lampshades, mirrors

and all areas which require gentle cleaning, adjustable length of the brush makes it suitable

for diﬀerent vacuuming conditions

slot tool (22) – for vacuuming corners, spaces under furniture and other hard to reach

areas inaccessible to other accessories.

Depending on the needs, plug the tools to the suction wand (18) or the socket (17).

3. Turn on the vacuum cleaner with the switch (3). The vacuum cleaner with operate at low

suction power. After turning the vacuum cleaner on, the battery charge indicator also lights

up. (6a).

4. To activate high suction power press the maximum suction power button “MAX” (4). Press-

ing the button again deactivates the high suction power. The activated high suction power

is displayed by the indicator (6d).

5. While using the electric brush (20) set the mode dedicated for vacuuming ﬂoors or carpets.

Selection of a mode is done with the electric brush mode selection button (5). Selection of a

mode is signalled by a corresponding “CARPET” icon (6b) or “FLOOR” icon (6c).

6. Monitor the capacity of the dust canister (8). An overﬁlled canister reduces the vacuuming

eﬃciency, increases energy consumption and leads to quicker accumulation of dust on the

ﬁlters.

CAUTION! Do not allow the dust canister to become overﬁlled! The dust level in the canister cannot exceed the

“MAX” level.

CAUTION! If the suction power of the vacuum cleaner dropped signiﬁcantly, it means that the wand and/or the

suction nozzle are clogged and/or the dust canister is full. Clear the wand and/or the suction nozzle and/or

empty the dust canister.

7. Should you require to empty the dust canister, proceed as follows:

- turn oﬀ the vacuum cleaner with the switch (3)

- place the dust canister over a waste bin