MPM MOD-27 Инструкция по эксплуатации онлайн [12/28] 464373

STATIC ELECTRICITY

Vacuum cleaning certain surfaces at a low air humidity may cause slight electriﬁcation of the

appliance. This is natural, does not damage the appliance and does not constitute its defect.

To minimise this phenomenon, it is recommended to:

 frequently discharge the appliance by touching items in the room with the metal pipe,

 increase air humidity in the room,

 use generally available anti-electrostatic products.

APPLIANCE ASSEMBLY

1. Press both latches on the suction hose mounting ring (17), insert the ring into the opening (7)

and release the latches. To disassemble, press the latches again and remove the ring (17) from

the opening (7).

2. Connect the other side of the suction hose (18) to the handle (19) and connect the metal

telescopic wand (16) to the other side of the handle (19). Install one of the tools, (20) or (21),

on the end of the wand.

USING THE APPLIANCE

1. Before turning on the vacuum cleaner, unwind the power cord (9) to a suitable length and

plug it into the mains socket. The yellow mark on the power cord indicates the optimum

length. Do not pull out the cord beyond the red mark! While unwinding the cord, do not

press the cord winder button (23).

2. Press the switch (1) to turn on the vacuum cleaner.

3. To wind the power cord, press the cord winder button (23) with one hand, while holding the

cord with another hand to prevent a sudden movement that could damage it.

Note! It is recommended to set the suction power control (1) to MIN before turning on the vacuum cleaner!

When at work, you can regulate the suction power by moving the suction power control left or right to a suita-

ble position.

Dust bag ﬁlling level indicator light turns red when the suction hose is clogged or the dust bag is full. You need

to replace the dust bag or remove the clogging from the suction hose.

4. To ensure optimum appliance setting upon the completion of work, use the guide (3) in the

rear of the vacuum cleaner. Place the rail in the rear of the ﬂoor-carpet attachment with con-

nected suction hose and telescopic pipe on the guide. The second guide that facilitates vacu-

um cleaner storage in the vertical position is under the bottom of the appliance.

ACCESSORIES OVERVIEW

FLOOR-CARPET ATTACHMENT

Designed for cleaning large ﬂat surfaces. It is equipped with castors that facilitate movement

in diﬃcult to access places and a ﬂexible joint, connecting it with the suction hose, which

allows directing at various angles. When you press the button on the upper attachment ho-