MPM MOD-27 Инструкция по эксплуатации онлайн [13/28] 464373

using (switch it to the brush mode), a row of rigid bristles will appear on the bottom to facili-

tate cleaning hard ﬂoors.

SLIT ATTACHMENT WITH MOVABLE BRUSH

Used for cleaning diﬃcult to access areas, such as in room corners, by and below pieces of

furniture and in bends and slits. It is also perfect for cleaning computer keyboards, drawers,

radiators or window frames.

REPLACING THE DUST BAG

To replace the dust bag, disconnect the appliance from the power supply, detach the suc-

tion hose (18), press the button (6) to open the upper cover (5), slide out the dust bag, while

holding the ﬂange with the inlet opening directed upwards. Install new dust bag. You can

purchase spare dust bags.

AIR FILTER CLEANING AND REPLACEMENT

Normal use of the vacuum cleaner requires periodical replacement or cleaning of the air ﬁlter,

which protects the motor from the side of the dust bag, and the air outlet ﬁlter. For this purpo-

se, disconnect the appliance from the power supply and detach the suction pipe.

1. Release the latch in the cover (10), remove the cover and then remove the ﬁlters (11), (12), (13).

2. Remove the motor ﬁlter (22). You will access the ﬁlter by lifting the cover (5) and removing the

dust bag (14). Remove the ﬁlter element (22).

3. Clean the HEPA ﬁlter element (12) of dust. The HEPA ﬁlter element must be perfectly dry be-

fore installing it again. Before closing the cover (10), make sure that the HEPA ﬁlter element is

aligned. Do not wash the HEPA ﬁlter element.

4. Wash ﬁlter cartridges (11), (13), (22) under running and cool water. Dry the ﬁlters thoroughly

after washing.

5. Cartridges should be cleaned every month or more frequently (depending on the usage). If a

cartridge is too contaminated or damaged, replace it with a new one.

6. When installing the ﬁlter elements, carefully align them in the housing and the vacuum

cleaner.

CAUTION: The ﬁlter cartridge being mounted must be completely dry. Mounting a wet ﬁlter may cause an

electric shock.

CLEANING AND MAINTENANCE

1. Periodically clean the vacuum cleaner housing and other external elements with a damp

cloth. This will allow maintaining good appearance of the appliance.

2. For this purpose, do not use sharp objects or any strong detergents (e.g. solvents), as this will

cause permanent damage to the vacuum cleaner housing.

3. For air ﬁlters and dust bag, follow the above instructions.