Elenberg FS-3010 [3/3] Assembly

Assembly

1. Put the end cap at the end of the cross base.

2. Fasten the lower pipe on the cross base with screw, and cover it with

base cover.

3. Slide the base cover onto the cross base along the lower pipe.

4. Pull the extension pole out, and tighten the stand pipe and steal pipe

with screw A.

5. Place the motor and switch box ﬁrmly on the top of the extension pole.

6. To ﬁnish assemble the guard and blade on the front part of the motor.

7. To change the direction and height, loosen the screw A and adjust the

extension pole at a suitable position then tighten the screw A again.

8. If the blade is shaking, please change the blade into another direction,

then try it again.

Unit description

1. GUARD

2. BLADE

3. EXTENSION POLE

4. SCREW A

5. BASE COVER

6. END CAP

Address to service center for consultation, when the service life of prod

uct has expired. Otherwise the further operation can entail impossibility of

normal use of the product.

ENGLISH

Service life of the given product - 3 years from the moment of sale