Laserliner ActiveTester Инструкция по эксплуатации онлайн [8/92] 479361

Laserliner ActiveTester Инструкция по эксплуатации онлайн [8/92] 479361
08
GB
Testing DC voltage2
Follow the instructions in section 1 („Testing AC voltage“). If
voltage is present, the relevant LEDs will light up. The positive
or negative LED will indicate the polarity.
Positive LED lights up: The positive pole is in contact with
the „+“ test prod
Negative LED lights up: The negative pole is in contact
with the „+“ test prod
Make sure that the measuring circuit is closed. It is not
sufÖ cient to use just one of the test prods.
!
Testing AC voltage
1
Hold the base device (+) in
your right hand and the second
test prod (-) in your left hand.
Now apply the test prods to
the contacts to be tested (line,
socket, etc.).
If voltage is present, all
the LEDs up to the voltage
measured will light up,
along with the positive
and negative LEDs.
-
+
Calibration3
The voltage tester needs to be calibrated and tested on a regular
basis to ensure it produces accurate measurement results. We
recommend carrying out calibration once a year.
Manual_AC-tiveTester_Rev.0610_GB.indd 08 09.09.2010 10:05:33 Uhr

Содержание

Похожие устройства

Скачать