Qtech QSW-2900-24F-AC [178/209] Syslog flash storage outputting configuration

13-176

13.2.6 Syslog Flash storage outputting configuration

Use logging flash command in global configuration command to enable flash logging and configure filter

regulations.

(1) Logging buffered configuration command is as following

logging flash

no logging flash

For example:

! Enable flash logging

QTECH(config)# logging flash

(2) Filtration rules configuration command is as following:

logging flash { level | none | level-list { level [ to level ] } &<1-8> } [ module { xxx | … } * ]

no logging flash filter

xxx: means the name of the module. … means other modules are omitted.

For example:

! Configure filter regulations of all terminals to allow all modules to output information with the level of 0, 1,

2, 6

QTECH(config)#logging flash level-list 0 to 2 6

13.2.7 Syslog logging host outputting configuration

Use following command to configure host ip address, and enable host logging, and configure filter regulation

of Syslog server.

(1) Server address configuration command is as following:

logging ip-address

no logging ip-address

At most 15 logging hosts are allowed to configure.

For example:

! Configure server address to be 1.1.1.1:

QTECH(config)#logging 1.1.1.1

(2) Logging buffered configuration command is as following:

logging host { all | ip-address }

no logging host { all | ip-address }

For example::

! Enable logging host 1.1.1.1

QTECH(config)#logging host 1.1.1.1

(3) Filtration rules configuration command is as following: