Qtech QSW-3200-24T Техническое описание онлайн [30/146] 481608

+7(495) 797-3311www.qtech.ru

Москва, Новозаводская ул., 18, стр. 1

no channel-group channel-group-number

In interface configuration mode, delete current interface from channel group.

For example:

! Delete interface Ethernet 0/0/3 from channel group 3

QTECH(config-if-ethernet-0/0/3)#no channel-group 3

 Configure load balance of switch

channel-group load-balance

{dst-ip|dst-mac|src-dst-ip|src-dst-mac|src-ip|src-mac}

choose physical link program when packet sending.

For example:

! Specify load-balance of channel-group 0 is destination mac

QTECH(config)#channel-group load-balance dst-mac

 Configure system LACP priority

lacp system-priority priority

For example:

! Configure LACP system priority is 40000

QTECH(config)#lacp system-priority 40000

 Delete system LACP priority

no lacp system-priority

Use this command to restore system default LACP priority to be 32768.

 Configure interface LACP priority

lacp port-priority priority

Use this command in interface configuration mode to configure LACP priority of the current

interface

For example:

! Configure lacp port-priority of Ethernet 0/2 to be 12345

QTECH(config-if-ethernet-0/0/2)#lacp port-priority 12345

 Delete interface LACP priority

 no lacp port-priority

 Use this command to restore interface default LACP priority to be 128.

 Display system LACP ID

show lacp sys-id

System id is in the form of 16 characters of system priority and 32 characters of system MAC

address.

For example:

! Display lacp system id

QTECH(config)#show lacp sys-id

 Display local information of channel group

show lacp internal [channel-group-number]