Qtech QSW-8200-52T-AC — команды QoS: Применение политик на портах и VLAN интерфейсах [17/38]

Превью страниц Страница 17 / 38

User Manual

Chapter 1. Commands for QoS 17

www.qtech.ru

 no service-policy input <policy-map-name>

 Function: Applies a policy map to the specified port; the no command deletes the

specified policy map applied to the port.

 Parameters: input <policy-map-name> applies the specified policy map to the ingress

direction of switch port.

 Default: No policy map is bound to port and VLAN interface by default.

 Command mode: Port Configuration Mode.

 Usage Guide: Only one policy map can be applied to each direction of each port. Egress

policy map is not supported yet.

 Example:

 Bind policy p1 to ingress Ethernet port1/0/1.

 Switch(config)#interface ethernet 1/0/1

 Switch(Config-If-Ethernet1/0/1)#service-policy input p1

 Bind policy p1 to ingress redirection of v1 interface.

 Switch(config)#interface vlan 1

 Switch(Config-If-vlan1)#service-policy input p1

1.26 service-policy input vlan

 Command: service-policy input <policy-map-name> vlan <vlan-list>

 no service-policy input <policy-map-name> vlan < vlan-list>

 Function: Applies a policy map to the specified VLAN interface; the no command

deletes the specified policy map applied to the VLAN interface.

 Parameters: input <policy-map-name> applies the specified policy map to the ingress

direction of switch VLAN interface.

 Default: No policy map is bound to VLAN interface by default.

 Command mode: Global Configuration Mode.

 Usage Guide: Only one policy map can be applied to each direction of each VLAN

interface. Use the policy-map on the port at first when binding policy-map on VLAN and

VLAN's port at the same time. Egress policy map is not supported yet.

 Example:

 Bind policy p1 to ingress of VLAN interface v2, v3, v4, v6.

 Switch(config)# service-policy input p1 vlan 2-4;6

1.27 set internal priority

 Command: set internal priority <new-intp>

 no set internal priority

 Function: Assign a new internal priority for the classified traffic, the no command

cancels the new value assigned.

 Parameter: <new-intp> Set a new internal priority for the traffic that accord the

matching standard.