Qtech QSW-8200-52T-AC Команды настройки vlan онлайн [11/41] 481623

User Manual

Chapter 1. VLAN Configuration 11

www.qtech.ru

 Function: Display the information of all the ports at dot1q-tunnel state.

 Parameter: None.

 Command Mode: Admin and Configuration Mode.

 Usage Guide: This command is used for displaying the information of the ports at

dot1q-tunnel state.

 Example: Display current dot1q-tunnel state.

 Switch#show dot1q-tunnel

 Interface Ethernet1/0/1:

 dot1q-tunnel is enable

 Interface Ethernet1/0/3:

 dot1q-tunnel is enable

1.1.18 show garp timer

 Command: show garp timer (join | leave | leaveall |)

 Function: Show the value of each timer. Note that the value is not the remaining time

to run the timer but the initial value when enabling the timer.

 Parameters: join, join timer

 leave, leave timer

 leaveAll, leaveAll timer

 Command Mode: Admin mode

 Default: 200|600|10000 milliseconds for join | leave | leaveAll timer respectively.

 Usage Guide: Show the corresponding value of the timer specified in the command.

 Example: Show the value of all garp timers currently.

 Switch#show garp timer join

 Garp join timer’s value is 200(ms)

1.1.19 show gvrp fsm information

 Command: show gvrp fsm information interface (ethernet | port-channel) IFNAME

 Function: Show the current state of all registered machines and request state machines

on specified or all ports.

 Parameters: ethernet, physical port

 port-channel, aggregate port

 IFNAME, port name

 Command Mode: Admin mode

 Default: MT for registered machine and VO for request state machine.

 Usage Guide: Show the corresponding state of all registered machines and request

state machines.

 Example: Show the state of all state machines.

 Switch#show gvrp fsm information interface ethernet 1/0/1

 VA：Very anxious Active member，AA：Anxious Active member，QA：Quiet Active

member